XML Security Verify

Since Camel 2.12

Only producer is supported

With this Apache Camel component, you can generate and validate XML signatures as described in the W3C standard XML Signature Syntax and Processing or as described in the successor version 1.1. For XML Encryption support, please refer to the XML Security Data Format.

You can find an introduction to XML signature here. The implementation of the component is based on JSR 105, the Java API corresponding to the W3C standard and supports the Apache Santuario and the JDK provider for JSR 105. The implementation will first try to use the Apache Santuario provider; if it does not find the Santuario provider, it will use the JDK provider. Further, the implementation is DOM based.

We also provide support for XAdES-BES/EPES for the signer endpoint; see subsection "XAdES-BES/EPES for the Signer Endpoint".

Maven users will need to add the following dependency to their pom.xml for this component:

<dependency>
    <groupId>org.apache.camel</groupId>
    <artifactId>camel-xmlsecurity</artifactId>
    <version>x.x.x</version>
    <!-- use the same version as your Camel core version -->
</dependency>

URI Format

The camel component consists of two endpoints which have the following URI format:

xmlsecurity-sign:name[?options]
xmlsecurity-verify:name[?options]

With the signer endpoint, you can generate a XML signature for the body of the in-message which can be either a XML document or a plain text. The enveloped, enveloping, or detached (as of 12.14) XML signature(s) will be set to the body of the out-message.
With the verifier endpoint, you can validate an enveloped or enveloping XML signature or even several detached XML signatures contained in the body of the in-message; if the validation is successful, then the original content is extracted from the XML signature and set to the body of the out-message.
The name part in the URI can be chosen by the user to distinguish between different signer/verifier endpoints within the camel context.

Configuring Options

Camel components are configured on two separate levels:

component level
endpoint level

Configuring Component Options

At the component level, you set general and shared configurations that are, then, inherited by the endpoints. It is the highest configuration level.

For example, a component may have security settings, credentials for authentication, urls for network connection and so forth.

Some components only have a few options, and others may have many. Because components typically have pre-configured defaults that are commonly used, then you may often only need to configure a few options on a component; or none at all.

You can configure components using:

the Component DSL.
in a configuration file (application.properties, *.yaml files, etc).
directly in the Java code.

Configuring Endpoint Options

You usually spend more time setting up endpoints because they have many options. These options help you customize what you want the endpoint to do. The options are also categorized into whether the endpoint is used as a consumer (from), as a producer (to), or both.

Configuring endpoints is most often done directly in the endpoint URI as path and query parameters. You can also use the Endpoint DSL and DataFormat DSL as a type safe way of configuring endpoints and data formats in Java.

A good practice when configuring options is to use Property Placeholders.

Property placeholders provide a few benefits:

They help prevent using hardcoded urls, port numbers, sensitive information, and other settings.
They allow externalizing the configuration from the code.
They help the code to become more flexible and reusable.

The following two sections list all the options, firstly for the component followed by the endpoint.

Component Options

The XML Security Verify component supports 19 options, which are listed below.

Name	Description	Default	Type
baseUri (producer)	You can set a base URI which is used in the URI dereferencing. Relative URIs are then concatenated with the base URI.		String
clearHeaders (producer)	Determines if the XML signature specific headers be cleared after signing and verification. Defaults to true.	true	Boolean
cryptoContextProperties (producer)	Sets the crypto context properties. See \{link XMLCryptoContext#setProperty(String, Object)}. Possible properties are defined in XMLSignContext an XMLValidateContext (see Supported Properties). The following properties are set by default to the value Boolean#TRUE for the XML validation. If you want to switch these features off you must set the property value to Boolean#FALSE. org.jcp.xml.dsig.validateManifests javax.xml.crypto.dsig.cacheReference.		Map
disallowDoctypeDecl (producer)	Disallows that the incoming XML document contains DTD DOCTYPE declaration. The default value is Boolean#TRUE.	true	Boolean
keySelector (producer)	Provides the key for validating the XML signature.		KeySelector
lazyStartProducer (producer)	Whether the producer should be started lazy (on the first message). By starting lazy you can use this to allow CamelContext and routes to startup in situations where a producer may otherwise fail during starting and cause the route to fail being started. By deferring this startup to be lazy then the startup failure can be handled during routing messages via Camel’s routing error handlers. Beware that when the first message is processed then creating and starting the producer may take a little time and prolong the total processing time of the processing.	false	boolean
omitXmlDeclaration (producer)	Indicator whether the XML declaration in the outgoing message body should be omitted. Default value is false. Can be overwritten by the header XmlSignatureConstants#HEADER_OMIT_XML_DECLARATION.	false	Boolean
outputNodeSearch (producer)	Sets the output node search value for determining the node from the XML signature document which shall be set to the output message body. The class of the value depends on the type of the output node search. The output node search is forwarded to XmlSignature2Message.		Object
outputNodeSearchType (producer)	Determines the search type for determining the output node which is serialized into the output message bodyF. See setOutputNodeSearch(Object). The supported default search types you can find in DefaultXmlSignature2Message.	Default	String
outputXmlEncoding (producer)	The character encoding of the resulting signed XML document. If null then the encoding of the original XML document is used.		String
removeSignatureElements (producer)	Indicator whether the XML signature elements (elements with local name Signature and namesapce http://www.w3.org/2000/09/xmldsig#) shall be removed from the document set to the output message. Normally, this is only necessary, if the XML signature is enveloped. The default value is Boolean#FALSE. This parameter is forwarded to XmlSignature2Message. This indicator has no effect if the output node search is of type DefaultXmlSignature2Message#OUTPUT_NODE_SEARCH_TYPE_DEFAULT.F.	false	Boolean
schemaResourceUri (producer)	Classpath to the XML Schema. Must be specified in the detached XML Signature case for determining the ID attributes, might be set in the enveloped and enveloping case. If set, then the XML document is validated with the specified XML schema. The schema resource URI can be overwritten by the header XmlSignatureConstants#HEADER_SCHEMA_RESOURCE_URI.		String
secureValidation (producer)	Enables secure validation. If true then secure validation is enabled.	true	Boolean
validationFailedHandler (producer)	Handles the different validation failed situations. The default implementation throws specific exceptions for the different situations (All exceptions have the package name org.apache.camel.component.xmlsecurity.api and are a sub-class of XmlSignatureInvalidException. If the signature value validation fails, a XmlSignatureInvalidValueException is thrown. If a reference validation fails, a XmlSignatureInvalidContentHashException is thrown. For more detailed information, see the JavaDoc.		ValidationFailedHandler
xmlSignature2Message (producer)	Bean which maps the XML signature to the output-message after the validation. How this mapping should be done can be configured by the options outputNodeSearchType, outputNodeSearch, and removeSignatureElements. The default implementation offers three possibilities which are related to the three output node search types Default, ElementName, and XPath. The default implementation determines a node which is then serialized and set to the body of the output message If the search type is ElementName then the output node (which must be in this case an element) is determined by the local name and namespace defined in the search value (see option outputNodeSearch). If the search type is XPath then the output node is determined by the XPath specified in the search value (in this case the output node can be of type Element, TextNode or Document). If the output node search type is Default then the following rules apply: In the enveloped XML signature case (there is a reference with URI= and transform http://www.w3.org/2000/09/xmldsig#enveloped-signature), the incoming XML document without the Signature element is set to the output message body. In the non-enveloped XML signature case, the message body is determined from a referenced Object; this is explained in more detail in chapter Output Node Determination in Enveloping XML Signature Case.		XmlSignature2Message
xmlSignatureChecker (producer)	This interface allows the application to check the XML signature before the validation is executed. This step is recommended in http://www.w3.org/TR/xmldsig-bestpractices/#check-what-is-signed.		XmlSignatureChecker
autowiredEnabled (advanced)	Whether autowiring is enabled. This is used for automatic autowiring options (the option must be marked as autowired) by looking up in the registry to find if there is a single instance of matching type, which then gets configured on the component. This can be used for automatic configuring JDBC data sources, JMS connection factories, AWS Clients, etc.	true	boolean
uriDereferencer (advanced)	If you want to restrict the remote access via reference URIs, you can set an own dereferencer. Optional parameter. If not set the provider default dereferencer is used which can resolve URI fragments, HTTP, file and XPpointer URIs. Attention: The implementation is provider dependent!.		URIDereferencer
verifierConfiguration (advanced)	To use a shared XmlVerifierConfiguration configuration to use as base for configuring endpoints.		XmlVerifierConfiguration

Name

Description

Default

Type

baseUri (producer)

You can set a base URI which is used in the URI dereferencing. Relative URIs are then concatenated with the base URI.

String

clearHeaders (producer)

Determines if the XML signature specific headers be cleared after signing and verification. Defaults to true.

true

Boolean

cryptoContextProperties (producer)

Sets the crypto context properties. See \{link XMLCryptoContext#setProperty(String, Object)}. Possible properties are defined in XMLSignContext an XMLValidateContext (see Supported Properties). The following properties are set by default to the value Boolean#TRUE for the XML validation. If you want to switch these features off you must set the property value to Boolean#FALSE. org.jcp.xml.dsig.validateManifests javax.xml.crypto.dsig.cacheReference.

Map

disallowDoctypeDecl (producer)

Disallows that the incoming XML document contains DTD DOCTYPE declaration. The default value is Boolean#TRUE.

true

Boolean

keySelector (producer)

Provides the key for validating the XML signature.

KeySelector

lazyStartProducer (producer)

Whether the producer should be started lazy (on the first message). By starting lazy you can use this to allow CamelContext and routes to startup in situations where a producer may otherwise fail during starting and cause the route to fail being started. By deferring this startup to be lazy then the startup failure can be handled during routing messages via Camel’s routing error handlers. Beware that when the first message is processed then creating and starting the producer may take a little time and prolong the total processing time of the processing.

false

boolean

omitXmlDeclaration (producer)

Indicator whether the XML declaration in the outgoing message body should be omitted. Default value is false. Can be overwritten by the header XmlSignatureConstants#HEADER_OMIT_XML_DECLARATION.

false

Boolean

outputNodeSearch (producer)

Sets the output node search value for determining the node from the XML signature document which shall be set to the output message body. The class of the value depends on the type of the output node search. The output node search is forwarded to XmlSignature2Message.

Object

outputNodeSearchType (producer)

Determines the search type for determining the output node which is serialized into the output message bodyF. See setOutputNodeSearch(Object). The supported default search types you can find in DefaultXmlSignature2Message.

Default

String

outputXmlEncoding (producer)

The character encoding of the resulting signed XML document. If null then the encoding of the original XML document is used.

String

removeSignatureElements (producer)

Indicator whether the XML signature elements (elements with local name Signature and namesapce http://www.w3.org/2000/09/xmldsig#) shall be removed from the document set to the output message. Normally, this is only necessary, if the XML signature is enveloped. The default value is Boolean#FALSE. This parameter is forwarded to XmlSignature2Message. This indicator has no effect if the output node search is of type DefaultXmlSignature2Message#OUTPUT_NODE_SEARCH_TYPE_DEFAULT.F.

false

Boolean

schemaResourceUri (producer)

Classpath to the XML Schema. Must be specified in the detached XML Signature case for determining the ID attributes, might be set in the enveloped and enveloping case. If set, then the XML document is validated with the specified XML schema. The schema resource URI can be overwritten by the header XmlSignatureConstants#HEADER_SCHEMA_RESOURCE_URI.

String

secureValidation (producer)

Enables secure validation. If true then secure validation is enabled.

true

Boolean

validationFailedHandler (producer)

Handles the different validation failed situations. The default implementation throws specific exceptions for the different situations (All exceptions have the package name org.apache.camel.component.xmlsecurity.api and are a sub-class of XmlSignatureInvalidException. If the signature value validation fails, a XmlSignatureInvalidValueException is thrown. If a reference validation fails, a XmlSignatureInvalidContentHashException is thrown. For more detailed information, see the JavaDoc.

ValidationFailedHandler

xmlSignature2Message (producer)

Bean which maps the XML signature to the output-message after the validation. How this mapping should be done can be configured by the options outputNodeSearchType, outputNodeSearch, and removeSignatureElements. The default implementation offers three possibilities which are related to the three output node search types Default, ElementName, and XPath. The default implementation determines a node which is then serialized and set to the body of the output message If the search type is ElementName then the output node (which must be in this case an element) is determined by the local name and namespace defined in the search value (see option outputNodeSearch). If the search type is XPath then the output node is determined by the XPath specified in the search value (in this case the output node can be of type Element, TextNode or Document). If the output node search type is Default then the following rules apply: In the enveloped XML signature case (there is a reference with URI= and transform http://www.w3.org/2000/09/xmldsig#enveloped-signature), the incoming XML document without the Signature element is set to the output message body. In the non-enveloped XML signature case, the message body is determined from a referenced Object; this is explained in more detail in chapter Output Node Determination in Enveloping XML Signature Case.

XmlSignature2Message

xmlSignatureChecker (producer)

This interface allows the application to check the XML signature before the validation is executed. This step is recommended in http://www.w3.org/TR/xmldsig-bestpractices/#check-what-is-signed.

XmlSignatureChecker

autowiredEnabled (advanced)

Whether autowiring is enabled. This is used for automatic autowiring options (the option must be marked as autowired) by looking up in the registry to find if there is a single instance of matching type, which then gets configured on the component. This can be used for automatic configuring JDBC data sources, JMS connection factories, AWS Clients, etc.

true

boolean

uriDereferencer (advanced)

If you want to restrict the remote access via reference URIs, you can set an own dereferencer. Optional parameter. If not set the provider default dereferencer is used which can resolve URI fragments, HTTP, file and XPpointer URIs. Attention: The implementation is provider dependent!.

URIDereferencer

verifierConfiguration (advanced)

To use a shared XmlVerifierConfiguration configuration to use as base for configuring endpoints.

XmlVerifierConfiguration

Endpoint Options

The XML Security Verify endpoint is configured using URI syntax:

xmlsecurity-verify:name

With the following path and query parameters:

Path Parameters (1 parameters)

Name	Description	Default	Type
name (producer)	Required The name part in the URI can be chosen by the user to distinguish between different verify endpoints within the camel context.		String

Name

Description

Default

Type

name (producer)

Required The name part in the URI can be chosen by the user to distinguish between different verify endpoints within the camel context.

String

Query Parameters (17 parameters)

Name	Description	Default	Type
baseUri (producer)	You can set a base URI which is used in the URI dereferencing. Relative URIs are then concatenated with the base URI.		String
clearHeaders (producer)	Determines if the XML signature specific headers be cleared after signing and verification. Defaults to true.	true	Boolean
cryptoContextProperties (producer)	Sets the crypto context properties. See \{link XMLCryptoContext#setProperty(String, Object)}. Possible properties are defined in XMLSignContext an XMLValidateContext (see Supported Properties). The following properties are set by default to the value Boolean#TRUE for the XML validation. If you want to switch these features off you must set the property value to Boolean#FALSE. org.jcp.xml.dsig.validateManifests javax.xml.crypto.dsig.cacheReference.		Map
disallowDoctypeDecl (producer)	Disallows that the incoming XML document contains DTD DOCTYPE declaration. The default value is Boolean#TRUE.	true	Boolean
keySelector (producer)	Provides the key for validating the XML signature.		KeySelector
omitXmlDeclaration (producer)	Indicator whether the XML declaration in the outgoing message body should be omitted. Default value is false. Can be overwritten by the header XmlSignatureConstants#HEADER_OMIT_XML_DECLARATION.	false	Boolean
outputNodeSearch (producer)	Sets the output node search value for determining the node from the XML signature document which shall be set to the output message body. The class of the value depends on the type of the output node search. The output node search is forwarded to XmlSignature2Message.		Object
outputNodeSearchType (producer)	Determines the search type for determining the output node which is serialized into the output message bodyF. See setOutputNodeSearch(Object). The supported default search types you can find in DefaultXmlSignature2Message.	Default	String
outputXmlEncoding (producer)	The character encoding of the resulting signed XML document. If null then the encoding of the original XML document is used.		String
removeSignatureElements (producer)	Indicator whether the XML signature elements (elements with local name Signature and namesapce http://www.w3.org/2000/09/xmldsig#) shall be removed from the document set to the output message. Normally, this is only necessary, if the XML signature is enveloped. The default value is Boolean#FALSE. This parameter is forwarded to XmlSignature2Message. This indicator has no effect if the output node search is of type DefaultXmlSignature2Message#OUTPUT_NODE_SEARCH_TYPE_DEFAULT.F.	false	Boolean
schemaResourceUri (producer)	Classpath to the XML Schema. Must be specified in the detached XML Signature case for determining the ID attributes, might be set in the enveloped and enveloping case. If set, then the XML document is validated with the specified XML schema. The schema resource URI can be overwritten by the header XmlSignatureConstants#HEADER_SCHEMA_RESOURCE_URI.		String
secureValidation (producer)	Enables secure validation. If true then secure validation is enabled.	true	Boolean
validationFailedHandler (producer)	Handles the different validation failed situations. The default implementation throws specific exceptions for the different situations (All exceptions have the package name org.apache.camel.component.xmlsecurity.api and are a sub-class of XmlSignatureInvalidException. If the signature value validation fails, a XmlSignatureInvalidValueException is thrown. If a reference validation fails, a XmlSignatureInvalidContentHashException is thrown. For more detailed information, see the JavaDoc.		ValidationFailedHandler
xmlSignature2Message (producer)	Bean which maps the XML signature to the output-message after the validation. How this mapping should be done can be configured by the options outputNodeSearchType, outputNodeSearch, and removeSignatureElements. The default implementation offers three possibilities which are related to the three output node search types Default, ElementName, and XPath. The default implementation determines a node which is then serialized and set to the body of the output message If the search type is ElementName then the output node (which must be in this case an element) is determined by the local name and namespace defined in the search value (see option outputNodeSearch). If the search type is XPath then the output node is determined by the XPath specified in the search value (in this case the output node can be of type Element, TextNode or Document). If the output node search type is Default then the following rules apply: In the enveloped XML signature case (there is a reference with URI= and transform http://www.w3.org/2000/09/xmldsig#enveloped-signature), the incoming XML document without the Signature element is set to the output message body. In the non-enveloped XML signature case, the message body is determined from a referenced Object; this is explained in more detail in chapter Output Node Determination in Enveloping XML Signature Case.		XmlSignature2Message
xmlSignatureChecker (producer)	This interface allows the application to check the XML signature before the validation is executed. This step is recommended in http://www.w3.org/TR/xmldsig-bestpractices/#check-what-is-signed.		XmlSignatureChecker
lazyStartProducer (producer (advanced))	Whether the producer should be started lazy (on the first message). By starting lazy you can use this to allow CamelContext and routes to startup in situations where a producer may otherwise fail during starting and cause the route to fail being started. By deferring this startup to be lazy then the startup failure can be handled during routing messages via Camel’s routing error handlers. Beware that when the first message is processed then creating and starting the producer may take a little time and prolong the total processing time of the processing.	false	boolean
uriDereferencer (advanced)	If you want to restrict the remote access via reference URIs, you can set an own dereferencer. Optional parameter. If not set the provider default dereferencer is used which can resolve URI fragments, HTTP, file and XPpointer URIs. Attention: The implementation is provider dependent!.		URIDereferencer

Name

Description

Default

Type

baseUri (producer)

You can set a base URI which is used in the URI dereferencing. Relative URIs are then concatenated with the base URI.

String

clearHeaders (producer)

Determines if the XML signature specific headers be cleared after signing and verification. Defaults to true.

true

Boolean

cryptoContextProperties (producer)

Map

disallowDoctypeDecl (producer)

Disallows that the incoming XML document contains DTD DOCTYPE declaration. The default value is Boolean#TRUE.

true

Boolean

keySelector (producer)

Provides the key for validating the XML signature.

KeySelector

omitXmlDeclaration (producer)

Indicator whether the XML declaration in the outgoing message body should be omitted. Default value is false. Can be overwritten by the header XmlSignatureConstants#HEADER_OMIT_XML_DECLARATION.

false

Boolean

outputNodeSearch (producer)

Object

outputNodeSearchType (producer)

Default

String

outputXmlEncoding (producer)

The character encoding of the resulting signed XML document. If null then the encoding of the original XML document is used.

String

removeSignatureElements (producer)

false

Boolean

schemaResourceUri (producer)

String

secureValidation (producer)

Enables secure validation. If true then secure validation is enabled.

true

Boolean

validationFailedHandler (producer)

ValidationFailedHandler

xmlSignature2Message (producer)

XmlSignature2Message

xmlSignatureChecker (producer)

This interface allows the application to check the XML signature before the validation is executed. This step is recommended in http://www.w3.org/TR/xmldsig-bestpractices/#check-what-is-signed.

XmlSignatureChecker

lazyStartProducer (producer (advanced))

false

boolean

uriDereferencer (advanced)

URIDereferencer

Message Headers

The XML Security Verify component supports 10 message header(s), which is/are listed below:

Name Description Default Type

Name	Description	Type
CamelXmlSignatureOmitXmlDeclaration (producer) Constant: `HEADER_OMIT_XML_DECLARATION`	Header which indicates that either the resulting signature document in the signature generation case or the resulting output of the verifier should not contain an XML declaration. If the header is not specified then a XML declaration is created. There is one exception: If the verifier result is a plain text this header has no effect. Possible values of the header are Boolean#TRUE or Boolean#FALSE. Overwrites the configuration parameter XmlSignatureConfiguration#setOmitXmlDeclaration(Boolean).	Boolean
CamelXmlSignatureSchemaResourceUri (producer) Constant: `HEADER_SCHEMA_RESOURCE_URI`	The schema resource URI.	String
CamelXmlSignatureXpathsToIdAttributes (producer) Constant: `HEADER_XPATHS_TO_ID_ATTRIBUTES`	XPaths to id attributes.	String
CamelXmlSignatureXAdESQualifyingPropertiesId (producer) Constant: `HEADER_XADES_QUALIFYING_PROPERTIES_ID`	for the 'Id' attribute value of QualifyingProperties element.	String
CamelXmlSignatureXAdESSignedDataObjectPropertiesId (producer) Constant: `HEADER_XADES_SIGNED_DATA_OBJECT_PROPERTIES_ID`	for the 'Id' attribute value of SignedDataObjectProperties element.	String
CamelXmlSignatureXAdESSignedSignaturePropertiesId (producer) Constant: `HEADER_XADES_SIGNED_SIGNATURE_PROPERTIES_ID`	for the 'Id' attribute value of SignedSignatureProperties element.	String
CamelXmlSignatureXAdESDataObjectFormatEncoding (producer) Constant: `HEADER_XADES_DATA_OBJECT_FORMAT_ENCODING`	for the value of the Encoding element of the DataObjectFormat element.	String
CamelXmlSignatureXAdESNamespace (producer) Constant: `HEADER_XADES_NAMESPACE`	overwrites the XAdES namespace parameter value.	String
CamelXmlSignatureXAdESPrefix (producer) Constant: `HEADER_XADES_PREFIX`	overwrites the XAdES prefix parameter value.	String
CamelCharsetName (producer) Constant: `CHARSET_NAME`	The name of the charset.	String

CamelXmlSignatureOmitXmlDeclaration (producer)

Constant: HEADER_OMIT_XML_DECLARATION

Header which indicates that either the resulting signature document in the signature generation case or the resulting output of the verifier should not contain an XML declaration. If the header is not specified then a XML declaration is created. There is one exception: If the verifier result is a plain text this header has no effect. Possible values of the header are Boolean#TRUE or Boolean#FALSE. Overwrites the configuration parameter XmlSignatureConfiguration#setOmitXmlDeclaration(Boolean).

Boolean

CamelXmlSignatureSchemaResourceUri (producer)

Constant: HEADER_SCHEMA_RESOURCE_URI

The schema resource URI.

String

CamelXmlSignatureXpathsToIdAttributes (producer)

Constant: HEADER_XPATHS_TO_ID_ATTRIBUTES

XPaths to id attributes.

String

CamelXmlSignatureXAdESQualifyingPropertiesId (producer)

Constant: HEADER_XADES_QUALIFYING_PROPERTIES_ID

for the 'Id' attribute value of QualifyingProperties element.

String

CamelXmlSignatureXAdESSignedDataObjectPropertiesId (producer)

Constant: HEADER_XADES_SIGNED_DATA_OBJECT_PROPERTIES_ID

for the 'Id' attribute value of SignedDataObjectProperties element.

String

CamelXmlSignatureXAdESSignedSignaturePropertiesId (producer)

Constant: HEADER_XADES_SIGNED_SIGNATURE_PROPERTIES_ID

for the 'Id' attribute value of SignedSignatureProperties element.

String

CamelXmlSignatureXAdESDataObjectFormatEncoding (producer)

Constant: HEADER_XADES_DATA_OBJECT_FORMAT_ENCODING

for the value of the Encoding element of the DataObjectFormat element.

String

CamelXmlSignatureXAdESNamespace (producer)

Constant: HEADER_XADES_NAMESPACE

overwrites the XAdES namespace parameter value.

String

CamelXmlSignatureXAdESPrefix (producer)

Constant: HEADER_XADES_PREFIX

overwrites the XAdES prefix parameter value.

String

CamelCharsetName (producer)

Constant: CHARSET_NAME

The name of the charset.

String

XML Signature Wrapping Modes

XML Signature differs between enveloped, enveloping, and detached XML signature. In the enveloped XML signature case, the XML Signature is wrapped by the signed XML Document; which means that the XML signature element is a child element of a parent element, which belongs to the signed XML Document. In the enveloping XML signature case, the XML Signature contains the signed content. All other cases are called detached XML signatures.

In the enveloped XML signature case, the supported generated XML signature has the following structure (Variables are surrounded by []).

<[parent element]>
   ... <!-- Signature element is added as last child of the parent element-->
   <Signature Id="generated_unique_signature_id">
       <SignedInfo>
             <Reference URI="">
                   <Transform Algorithm="http://www.w3.org/2000/09/xmldsig#enveloped-signature"/>
                   (<Transform>)* <!-- By default "http://www.w3.org/2006/12/xml-c14n11" is added to the transforms -->
                   <DigestMethod>
                   <DigestValue>
             </Reference>
             (<Reference URI="#[keyinfo_Id]">
                   <Transform Algorithm="http://www.w3.org/TR/2001/REC-xml-c14n-20010315"/>
                   <DigestMethod>
                   <DigestValue>
             </Reference>)?
             <!-- further references possible, see option 'properties' below -->
      </SignedInfo>
      <SignatureValue>
      (<KeyInfo Id="[keyinfo_id]">)?
      <!-- Object elements possible, see option 'properties' below -->
  </Signature>
</[parent element]>

In the enveloping XML signature case, the supported generated XML signature has the structure:

<Signature Id="generated_unique_signature_id">
  <SignedInfo>
         <Reference URI="#generated_unique_object_id" type="[optional_type_value]">
               (<Transform>)* <!-- By default "http://www.w3.org/2006/12/xml-c14n11" is added to the transforms -->
               <DigestMethod>
               <DigestValue>
         </Reference>
         (<Reference URI="#[keyinfo_id]">
               <Transform Algorithm="http://www.w3.org/TR/2001/REC-xml-c14n-20010315"/>
               <DigestMethod>
               <DigestValue>
         </Reference>)?
          <!-- further references possible, see option 'properties' below  -->
  </SignedInfo>
  <SignatureValue>
  (<KeyInfo Id="[keyinfo_id]">)?
  <Object Id="generated_unique_object_id"/> <!-- The Object element contains the in-message body; the object ID can either be generated or set by the option parameter "contentObjectId" -->
  <!-- Further Object elements possible, see option 'properties' below -->
</Signature>

Detached XML signatures with the following structure are supported (see also sub-chapter XML Signatures as Siblings of Signed Elements):

(<[signed element] Id="[id_value]">
<!-- signed element must have an attribute of type ID -->
      ...

</[signed element]>
<other sibling/>*
<!-- between the signed element and the corresponding signature element, there can be other siblings.
 Signature element is added as last sibling. -->
<Signature Id="generated_unique_ID">
   <SignedInfo>
      <CanonicalizationMethod>
      <SignatureMethod>
      <Reference URI="#[id_value]" type="[optional_type_value]">
      <!-- reference URI contains the ID attribute value of the signed element -->
            (<Transform>)* <!-- By default "http://www.w3.org/2006/12/xml-c14n11" is added to the transforms -->
            <DigestMethod>
            <DigestValue>
      </Reference>
      (<Reference URI="#[generated_keyinfo_Id]">
            <Transform Algorithm="http://www.w3.org/TR/2001/REC-xml-c14n-20010315"/>
            <DigestMethod>
            <DigestValue>
      </Reference>)?
   </SignedInfo>
   <SignatureValue>
   (<KeyInfo Id="[generated_keyinfo_id]">)?
</Signature>)+

Basic Example

The following example shows the basic usage of the component.

from("direct:enveloping").to("xmlsecurity-sign://enveloping?keyAccessor=#accessor",
                             "xmlsecurity-verify://enveloping?keySelector=#selector",
                             "mock:result")

In Spring XML:

<from uri="direct:enveloping" />
    <to uri="xmlsecurity-sign://enveloping?keyAccessor=#accessor" />
    <to uri="xmlsecurity-verify://enveloping?keySelector=#selector" />
<to uri="mock:result" />

For the signing process, a private key is necessary. You specify a key accessor bean which provides this private key. For the validation, the corresponding public key is necessary; you specify a key selector bean which provides this public key.

The key accessor bean must implement the KeyAccessor interface. The package org.apache.camel.component.xmlsecurity.api contains the default implementation class DefaultKeyAccessor which reads the private key from a Java keystore.

The key selector bean must implement the javax.xml.crypto.KeySelector interface. The package org.apache.camel.component.xmlsecurity.api contains the default implementation class DefaultKeySelector which reads the public key from a keystore.

In the example, the default signature algorithm http://www.w3.org/2000/09/xmldsig#rsa-sha1 is used. You can set the signature algorithm of your choice by the option signatureAlgorithm (see below). The signer endpoint creates an enveloping XML signature. If you want to create an enveloped XML signature then you must specify the parent element of the Signature element; see option parentLocalName for more details.

For creating detached XML signatures, see sub-chapter "Detached XML Signatures as Siblings of the Signed Elements".

Detached XML Signatures as Siblings of the Signed Elements

You can create detached signatures where the signature is a sibling of the signed element. The following example contains two detached signatures. The first signature is for the element C and the second signature is for element A. The signatures are nested; the second signature is for the element A which also contains the first signature.

Example Detached XML Signatures

<?xml version="1.0" encoding="UTF-8" ?>
<root>
    <A ID="IDforA">
        <B>
            <C ID="IDforC">
                <D>dvalue</D>
            </C>
            <ds:Signature xmlns:ds="http://www.w3.org/2000/09/xmldsig#"
                Id="_6bf13099-0568-4d76-8649-faf5dcb313c0">
                <ds:SignedInfo>
                    <ds:CanonicalizationMethod
                        Algorithm="http://www.w3.org/TR/2001/REC-xml-c14n-20010315" />
                    <ds:SignatureMethod
                        Algorithm="http://www.w3.org/2000/09/xmldsig#rsa-sha1" />
                    <ds:Reference URI="#IDforC">
                        ...
                    </ds:Reference>
                </ds:SignedInfo>
                <ds:SignatureValue>aUDFmiG71</ds:SignatureValue>
            </ds:Signature>
        </B>
    </A>
    <ds:Signature xmlns:ds="http://www.w3.org/2000/09/xmldsig#"Id="_6b02fb8a-30df-42c6-ba25-76eba02c8214">
        <ds:SignedInfo>
            <ds:CanonicalizationMethod
                Algorithm="http://www.w3.org/TR/2001/REC-xml-c14n-20010315" />
            <ds:SignatureMethod
                Algorithm="http://www.w3.org/2000/09/xmldsig#rsa-sha1" />
            <ds:Reference URI="#IDforA">
                ...
            </ds:Reference>
        </ds:SignedInfo>
        <ds:SignatureValue>q3tvRoGgc8cMUqUSzP6C21zb7tt04riPnDuk=</ds:SignatureValue>
    </ds:Signature>
<root>

The example shows that you can sign several elements and that for each element a signature is created as sibling. The elements to be signed must have an attribute of type ID. The ID type of the attribute must be defined in the XML schema (see option schemaResourceUri). You specify a list of XPATH expressions pointing to attributes of type ID (see option xpathsToIdAttributes). These attributes determine the elements to be signed. The elements are signed by the same key given by the keyAccessor bean. Elements with higher (i.e. deeper) hierarchy level are signed first. In the example, the element C is signed before the element A.

Java DSL Example

from("direct:detached")
  .to("xmlsecurity-sign://detached?keyAccessor=#keyAccessorBeant&xpathsToIdAttributes=#xpathsToIdAttributesBean&schemaResourceUri=Test.xsd")
  .to("xmlsecurity-verify://detached?keySelector=#keySelectorBean&schemaResourceUri=org/apache/camel/component/xmlsecurity/Test.xsd")
  .to("mock:result");

Spring Example

<bean id="xpathsToIdAttributesBean" class="java.util.ArrayList">
      <constructor-arg type="java.util.Collection">
          <list>
              <bean
                  class="org.apache.camel.component.xmlsecurity.api.XmlSignatureHelper"
                  factory-method="getXpathFilter">
                  <constructor-arg type="java.lang.String"
                      value="/ns:root/a/@ID" />
                  <constructor-arg>
                      <map key-type="java.lang.String" value-type="java.lang.String">
                          <entry key="ns" value="http://test" />
                      </map>
                  </constructor-arg>
              </bean>
          </list>
      </constructor-arg>
  </bean>
...
 <from uri="direct:detached" />
      <to
          uri="xmlsecurity-sign://detached?keyAccessor=#keyAccessorBean&amp;xpathsToIdAttributes=#xpathsToIdAttributesBean&amp;schemaResourceUri=Test.xsd" />
      <to
          uri="xmlsecurity-verify://detached?keySelector=#keySelectorBean&amp;schemaResourceUri=Test.xsd" />
      <to uri="mock:result" />

XAdES-BES/EPES for the Signer Endpoint

XML Advanced Electronic Signatures (XAdES) defines extensions to XML Signature. This standard was defined by the European Telecommunication Standards Institute and allows you to create signatures which are compliant to the European Union Directive (1999/93/EC) on a Community framework for electronic signatures. XAdES defines different sets of signature properties which are called signature forms. We support the signature forms Basic Electronic Signature (XAdES-BES) and Explicit Policy Based Electronic Signature (XAdES-EPES) for the Signer Endpoint. The forms Electronic Signature with Validation Data XAdES-T and XAdES-C are not supported.

We support the following properties of the XAdES-EPES form ("?" denotes zero or one occurrence):

Supported XAdES-EPES Properties

<QualifyingProperties Target>
    <SignedProperties>
        <SignedSignatureProperties>
            (SigningTime)?
            (SigningCertificate)?
            (SignaturePolicyIdentifier)
            (SignatureProductionPlace)?
            (SignerRole)?
        </SignedSignatureProperties>
        <SignedDataObjectProperties>
            (DataObjectFormat)?
            (CommitmentTypeIndication)?
        </SignedDataObjectProperties>
    </SignedProperties>
</QualifyingProperties>

The properties of the XAdES-BES form are the same except that the SignaturePolicyIdentifier property is not part of XAdES-BES.

You can configure the XAdES-BES/EPES properties via the bean org.apache.camel.component.xmlsecurity.api.XAdESSignatureProperties or org.apache.camel.component.xmlsecurity.api.DefaultXAdESSignatureProperties. XAdESSignatureProperties does support all properties mentioned above except the SigningCertificate property. To get the SigningCertificate property, you must overwrite either the method XAdESSignatureProperties.getSigningCertificate() or XAdESSignatureProperties.getSigningCertificateChain(). The class DefaultXAdESSignatureProperties overwrites the method getSigningCertificate() and allows you to specify the signing certificate via a keystore and alias. The following example shows all parameters you can specify. If you do not need certain parameters you can just omit them.

XAdES-BES/EPES Example in Java DSL

 Keystore keystore = ... // load a keystore
DefaultKeyAccessor accessor = new DefaultKeyAccessor();
accessor.setKeyStore(keystore);
accessor.setPassword("password");
accessor.setAlias("cert_alias"); // signer key alias

DefaultXAdESSignatureProperties props = new DefaultXAdESSignatureProperties();
props.setNamespace("http://uri.etsi.org/01903/v1.3.2#"); // sets the namespace for the XAdES elements; the namspace is related to the XAdES version, default value is "http://uri.etsi.org/01903/v1.3.2#", other possible values are "http://uri.etsi.org/01903/v1.1.1#" and "http://uri.etsi.org/01903/v1.2.2#"
props.setPrefix("etsi"); // sets the prefix for the XAdES elements, default value is "etsi"

// signing certificate
props.setKeystore(keystore));
props.setAlias("cert_alias"); // specify the alias of the signing certificate in the keystore = signer key alias
props.setDigestAlgorithmForSigningCertificate(DigestMethod.SHA256); // possible values for the algorithm are "http://www.w3.org/2000/09/xmldsig#sha1", "http://www.w3.org/2001/04/xmlenc#sha256", "http://www.w3.org/2001/04/xmldsig-more#sha384", "http://www.w3.org/2001/04/xmlenc#sha512", default value is "http://www.w3.org/2001/04/xmlenc#sha256"
props.setSigningCertificateURIs(Collections.singletonList("http://certuri"));

// signing time
props.setAddSigningTime(true);

// policy
props.setSignaturePolicy(XAdESSignatureProperties.SIG_POLICY_EXPLICIT_ID);
// also the values XAdESSignatureProperties.SIG_POLICY_NONE ("None"), and XAdESSignatureProperties.SIG_POLICY_IMPLIED ("Implied")are possible, default value is XAdESSignatureProperties.SIG_POLICY_EXPLICIT_ID ("ExplicitId")
// For "None" and "Implied" you must not specify any further policy parameters
props.setSigPolicyId("urn:oid:1.2.840.113549.1.9.16.6.1");
props.setSigPolicyIdQualifier("OIDAsURN"); //allowed values are empty string, "OIDAsURI", "OIDAsURN"; default value is empty string
props.setSigPolicyIdDescription("invoice version 3.1");
props.setSignaturePolicyDigestAlgorithm(DigestMethod.SHA256);// possible values for the algorithm are "http://www.w3.org/2000/09/xmldsig#sha1", http://www.w3.org/2001/04/xmlenc#sha256", "http://www.w3.org/2001/04/xmldsig-more#sha384", "http://www.w3.org/2001/04/xmlenc#sha512", default value is http://www.w3.org/2001/04/xmlenc#sha256"
props.setSignaturePolicyDigestValue("Ohixl6upD6av8N7pEvDABhEL6hM=");
// you can add  qualifiers for the signature policy either by specifying text or an XML fragment with the root element "SigPolicyQualifier"
props.setSigPolicyQualifiers(Arrays
    .asList(new String[] {
        "<SigPolicyQualifier xmlns=\"http://uri.etsi.org/01903/v1.3.2#\"><SPURI>http://test.com/sig.policy.pdf</SPURI><SPUserNotice><ExplicitText>display text</ExplicitText>"
            + "</SPUserNotice></SigPolicyQualifier>", "category B" }));
props.setSigPolicyIdDocumentationReferences(Arrays.asList(new String[] {"http://test.com/policy.doc.ref1.txt",
    "http://test.com/policy.doc.ref2.txt" }));

// production place
props.setSignatureProductionPlaceCity("Munich");
props.setSignatureProductionPlaceCountryName("Germany");
props.setSignatureProductionPlacePostalCode("80331");
props.setSignatureProductionPlaceStateOrProvince("Bavaria");

//role
// you can add claimed roles either by specifying text or an XML fragment with the root element "ClaimedRole"
props.setSignerClaimedRoles(Arrays.asList(new String[] {"test",
    "<a:ClaimedRole xmlns:a=\"http://uri.etsi.org/01903/v1.3.2#\"><TestRole>TestRole</TestRole></a:ClaimedRole>" }));
props.setSignerCertifiedRoles(Collections.singletonList(new XAdESEncapsulatedPKIData("Ahixl6upD6av8N7pEvDABhEL6hM=",
    "http://uri.etsi.org/01903/v1.2.2#DER", "IdCertifiedRole")));

// data object format
props.setDataObjectFormatDescription("invoice");
props.setDataObjectFormatMimeType("text/xml");
props.setDataObjectFormatIdentifier("urn:oid:1.2.840.113549.1.9.16.6.2");
props.setDataObjectFormatIdentifierQualifier("OIDAsURN"); //allowed values are empty string, "OIDAsURI", "OIDAsURN"; default value is empty string
props.setDataObjectFormatIdentifierDescription("identifier desc");
props.setDataObjectFormatIdentifierDocumentationReferences(Arrays.asList(new String[] {
    "http://test.com/dataobject.format.doc.ref1.txt", "http://test.com/dataobject.format.doc.ref2.txt" }));

//commitment
props.setCommitmentTypeId("urn:oid:1.2.840.113549.1.9.16.6.4");
props.setCommitmentTypeIdQualifier("OIDAsURN"); //allowed values are empty string, "OIDAsURI", "OIDAsURN"; default value is empty string
props.setCommitmentTypeIdDescription("description for commitment type ID");
props.setCommitmentTypeIdDocumentationReferences(Arrays.asList(new String[] {"http://test.com/commitment.ref1.txt",
    "http://test.com/commitment.ref2.txt" }));
// you can specify a commitment type qualifier either by simple text or an XML fragment with root element "CommitmentTypeQualifier"
props.setCommitmentTypeQualifiers(Arrays.asList(new String[] {"commitment qualifier",
    "<c:CommitmentTypeQualifier xmlns:c=\"http://uri.etsi.org/01903/v1.3.2#\"><C>c</C></c:CommitmentTypeQualifier>" }));

beanRegistry.bind("xmlSignatureProperties",props);
beanRegistry.bind("keyAccessorDefault",keyAccessor);

// you must reference the properties bean in the "xmlsecurity" URI
from("direct:xades").to("xmlsecurity-sign://xades?keyAccessor=#keyAccessorDefault&properties=#xmlSignatureProperties")
             .to("mock:result");

XAdES-BES/EPES Example in Spring XML

...
<from uri="direct:xades" />
    <to
        uri="xmlsecurity-sign://xades?keyAccessor=#accessorRsa&amp;properties=#xadesProperties" />
    <to uri="mock:result" />
...
<bean id="xadesProperties"
    class="org.apache.camel.component.xmlsecurity.api.XAdESSignatureProperties">
    <!-- For more properties see the previous Java DSL example.
         If you want to have a signing certificate then use the bean class DefaultXAdESSignatureProperties (see the previous Java DSL example). -->
    <property name="signaturePolicy" value="ExplicitId" />
    <property name="sigPolicyId" value="http://www.test.com/policy.pdf" />
    <property name="sigPolicyIdDescription" value="factura" />
    <property name="signaturePolicyDigestAlgorithm" value="http://www.w3.org/2000/09/xmldsig#sha1" />
    <property name="signaturePolicyDigestValue" value="Ohixl6upD6av8N7pEvDABhEL1hM=" />
    <property name="signerClaimedRoles" ref="signerClaimedRoles_XMLSigner" />
    <property name="dataObjectFormatDescription" value="Factura electrónica" />
    <property name="dataObjectFormatMimeType" value="text/xml" />
</bean>
<bean class="java.util.ArrayList" id="signerClaimedRoles_XMLSigner">
    <constructor-arg>
        <list>
            <value>Emisor</value>
            <value>&lt;ClaimedRole
                xmlns=&quot;http://uri.etsi.org/01903/v1.3.2#&quot;&gt;&lt;test
                xmlns=&quot;http://test.com/&quot;&gt;test&lt;/test&gt;&lt;/ClaimedRole&gt;</value>
        </list>
    </constructor-arg>
</bean>

Limitations with regard to XAdES version 1.4.2

No support for signature form XAdES-T and XAdES-C
Only signer part implemented. Verifier part currently not available.
No support for the QualifyingPropertiesReference element (see section 6.3.2 of spec).
No support for the Transforms element contained in the SignaturePolicyId element contained in the SignaturePolicyIdentifier element
No support of the CounterSignature element → no support for the UnsignedProperties element
At most one DataObjectFormat element. More than one DataObjectFormat element makes no sense because we have only one data object which is signed (this is the incoming message body to the XML signer endpoint).
At most one CommitmentTypeIndication element. More than one CommitmentTypeIndication element makes no sense because we have only one data object which is signed (this is the incoming message body to the XML signer endpoint).
A CommitmentTypeIndication element contains always the AllSignedDataObjects element. The ObjectReference element within CommitmentTypeIndication element is not supported.
The AllDataObjectsTimeStamp element is not supported
The IndividualDataObjectsTimeStamp element is not supported

Spring Boot Auto-Configuration

When using xmlsecurity-verify with Spring Boot make sure to use the following Maven dependency to have support for auto configuration:

<dependency>
  <groupId>org.apache.camel.springboot</groupId>
  <artifactId>camel-xmlsecurity-starter</artifactId>
  <version>x.x.x</version>
  <!-- use the same version as your Camel core version -->
</dependency>

The component supports 62 options, which are listed below.

Name	Description	Default	Type
camel.component.xmlsecurity-sign.add-key-info-reference	In order to protect the KeyInfo element from tampering you can add a reference to the signed info element so that it is protected via the signature value. The default value is true. Only relevant when a KeyInfo is returned by KeyAccessor. and KeyInfo#getId() is not null.	true	Boolean
camel.component.xmlsecurity-sign.autowired-enabled	Whether autowiring is enabled. This is used for automatic autowiring options (the option must be marked as autowired) by looking up in the registry to find if there is a single instance of matching type, which then gets configured on the component. This can be used for automatic configuring JDBC data sources, JMS connection factories, AWS Clients, etc.	true	Boolean
camel.component.xmlsecurity-sign.base-uri	You can set a base URI which is used in the URI dereferencing. Relative URIs are then concatenated with the base URI.		String
camel.component.xmlsecurity-sign.canonicalization-method	Canonicalization method used to canonicalize the SignedInfo element before the digest is calculated. You can use the helper methods XmlSignatureHelper.getCanonicalizationMethod(String algorithm) or getCanonicalizationMethod(String algorithm, List inclusiveNamespacePrefixes) to create a canonicalization method. The option is a javax.xml.crypto.AlgorithmMethod type.		AlgorithmMethod
camel.component.xmlsecurity-sign.clear-headers	Determines if the XML signature specific headers be cleared after signing and verification. Defaults to true.	true	Boolean
camel.component.xmlsecurity-sign.content-object-id	Sets the content object Id attribute value. By default a UUID is generated. If you set the null value, then a new UUID will be generated. Only used in the enveloping case.		String
camel.component.xmlsecurity-sign.content-reference-type	Type of the content reference. The default value is null. This value can be overwritten by the header XmlSignatureConstants#HEADER_CONTENT_REFERENCE_TYPE.		String
camel.component.xmlsecurity-sign.content-reference-uri	Reference URI for the content to be signed. Only used in the enveloped case. If the reference URI contains an ID attribute value, then the resource schema URI ( setSchemaResourceUri(String)) must also be set because the schema validator will then find out which attributes are ID attributes. Will be ignored in the enveloping or detached case.		String
camel.component.xmlsecurity-sign.crypto-context-properties	Sets the crypto context properties. See \{link XMLCryptoContext#setProperty(String, Object)}. Possible properties are defined in XMLSignContext an XMLValidateContext (see Supported Properties). The following properties are set by default to the value Boolean#TRUE for the XML validation. If you want to switch these features off you must set the property value to Boolean#FALSE. org.jcp.xml.dsig.validateManifests javax.xml.crypto.dsig.cacheReference.		Map
camel.component.xmlsecurity-sign.digest-algorithm	Digest algorithm URI. Optional parameter. This digest algorithm is used for calculating the digest of the input message. If this digest algorithm is not specified then the digest algorithm is calculated from the signature algorithm. Example: http://www.w3.org/2001/04/xmlenc#sha256.		String
camel.component.xmlsecurity-sign.disallow-doctype-decl	Disallows that the incoming XML document contains DTD DOCTYPE declaration. The default value is Boolean#TRUE.	true	Boolean
camel.component.xmlsecurity-sign.enabled	Whether to enable auto configuration of the xmlsecurity-sign component. This is enabled by default.		Boolean
camel.component.xmlsecurity-sign.key-accessor	For the signing process, a private key is necessary. You specify a key accessor bean which provides this private key. The key accessor bean must implement the KeyAccessor interface. The package org.apache.camel.component.xmlsecurity.api contains the default implementation class DefaultKeyAccessor which reads the private key from a Java keystore. The option is a org.apache.camel.component.xmlsecurity.api.KeyAccessor type.		KeyAccessor
camel.component.xmlsecurity-sign.lazy-start-producer	Whether the producer should be started lazy (on the first message). By starting lazy you can use this to allow CamelContext and routes to startup in situations where a producer may otherwise fail during starting and cause the route to fail being started. By deferring this startup to be lazy then the startup failure can be handled during routing messages via Camel’s routing error handlers. Beware that when the first message is processed then creating and starting the producer may take a little time and prolong the total processing time of the processing.	false	Boolean
camel.component.xmlsecurity-sign.omit-xml-declaration	Indicator whether the XML declaration in the outgoing message body should be omitted. Default value is false. Can be overwritten by the header XmlSignatureConstants#HEADER_OMIT_XML_DECLARATION.	false	Boolean
camel.component.xmlsecurity-sign.output-xml-encoding	The character encoding of the resulting signed XML document. If null then the encoding of the original XML document is used.		String
camel.component.xmlsecurity-sign.parent-local-name	Local name of the parent element to which the XML signature element will be added. Only relevant for enveloped XML signature. Alternatively you can also use setParentXpath(XPathFilterParameterSpec). Default value is null. The value must be null for enveloping and detached XML signature. This parameter or the parameter setParentXpath(XPathFilterParameterSpec) for enveloped signature and the parameter setXpathsToIdAttributes(List) for detached signature must not be set in the same configuration. If the parameters parentXpath and parentLocalName are specified in the same configuration then an exception is thrown.		String
camel.component.xmlsecurity-sign.parent-namespace	Namespace of the parent element to which the XML signature element will be added.		String
camel.component.xmlsecurity-sign.parent-xpath	Sets the XPath to find the parent node in the enveloped case. Either you specify the parent node via this method or the local name and namespace of the parent with the methods setParentLocalName(String) and setParentNamespace(String). Default value is null. The value must be null for enveloping and detached XML signature. If the parameters parentXpath and parentLocalName are specified in the same configuration then an exception is thrown. The option is a javax.xml.crypto.dsig.spec.XPathFilterParameterSpec type.		XPathFilterParameterSpec
camel.component.xmlsecurity-sign.plain-text	Indicator whether the message body contains plain text. The default value is false, indicating that the message body contains XML. The value can be overwritten by the header XmlSignatureConstants#HEADER_MESSAGE_IS_PLAIN_TEXT.	false	Boolean
camel.component.xmlsecurity-sign.plain-text-encoding	Encoding of the plain text. Only relevant if the message body is plain text (see parameter plainText. Default value is UTF-8.	UTF-8	String
camel.component.xmlsecurity-sign.prefix-for-xml-signature-namespace	Namespace prefix for the XML signature namespace http://www.w3.org/2000/09/xmldsig#. Default value is ds. If null or an empty value is set then no prefix is used for the XML signature namespace. See best practice http://www.w3.org/TR/xmldsig-bestpractices/#signing-xml- without-namespaces.	ds	String
camel.component.xmlsecurity-sign.properties	For adding additional References and Objects to the XML signature which contain additional properties, you can provide a bean which implements the XmlSignatureProperties interface. The option is a org.apache.camel.component.xmlsecurity.api.XmlSignatureProperties type.		XmlSignatureProperties
camel.component.xmlsecurity-sign.schema-resource-uri	Classpath to the XML Schema. Must be specified in the detached XML Signature case for determining the ID attributes, might be set in the enveloped and enveloping case. If set, then the XML document is validated with the specified XML schema. The schema resource URI can be overwritten by the header XmlSignatureConstants#HEADER_SCHEMA_RESOURCE_URI.		String
camel.component.xmlsecurity-sign.signature-algorithm	Signature algorithm. Default value is http://www.w3.org/2000/09/xmldsig#rsa-sha1.	http://www.w3.org/2001/04/xmldsig-more#rsa-sha256	String
camel.component.xmlsecurity-sign.signature-id	Sets the signature Id. If this parameter is not set (null value) then a unique ID is generated for the signature ID (default). If this parameter is set to (empty string) then no Id attribute is created in the signature element.		String
camel.component.xmlsecurity-sign.signer-configuration	To use a shared XmlSignerConfiguration configuration to use as base for configuring endpoints. The option is a org.apache.camel.component.xmlsecurity.processor.XmlSignerConfiguration type.		XmlSignerConfiguration
camel.component.xmlsecurity-sign.transform-methods	Transforms which are executed on the message body before the digest is calculated. By default, C14n is added and in the case of enveloped signature (see option parentLocalName) also http://www.w3.org/2000/09/xmldsig#enveloped-signature is added at position 0 of the list. Use methods in XmlSignatureHelper to create the transform methods.		List
camel.component.xmlsecurity-sign.uri-dereferencer	If you want to restrict the remote access via reference URIs, you can set an own dereferencer. Optional parameter. If not set the provider default dereferencer is used which can resolve URI fragments, HTTP, file and XPpointer URIs. Attention: The implementation is provider dependent!. The option is a javax.xml.crypto.URIDereferencer type.		URIDereferencer
camel.component.xmlsecurity-sign.xpaths-to-id-attributes	Define the elements which are signed in the detached case via XPATH expressions to ID attributes (attributes of type ID). For each element found via the XPATH expression a detached signature is created whose reference URI contains the corresponding attribute value (preceded by '#'). The signature becomes the last sibling of the signed element. Elements with deeper hierarchy level are signed first. You can also set the XPATH list dynamically via the header XmlSignatureConstants#HEADER_XPATHS_TO_ID_ATTRIBUTES. The parameter setParentLocalName(String) or setParentXpath(XPathFilterParameterSpec) for enveloped signature and this parameter for detached signature must not be set in the same configuration.		List
camel.component.xmlsecurity-verify.autowired-enabled	Whether autowiring is enabled. This is used for automatic autowiring options (the option must be marked as autowired) by looking up in the registry to find if there is a single instance of matching type, which then gets configured on the component. This can be used for automatic configuring JDBC data sources, JMS connection factories, AWS Clients, etc.	true	Boolean
camel.component.xmlsecurity-verify.base-uri	You can set a base URI which is used in the URI dereferencing. Relative URIs are then concatenated with the base URI.		String
camel.component.xmlsecurity-verify.clear-headers	Determines if the XML signature specific headers be cleared after signing and verification. Defaults to true.	true	Boolean
camel.component.xmlsecurity-verify.crypto-context-properties	Sets the crypto context properties. See \{link XMLCryptoContext#setProperty(String, Object)}. Possible properties are defined in XMLSignContext an XMLValidateContext (see Supported Properties). The following properties are set by default to the value Boolean#TRUE for the XML validation. If you want to switch these features off you must set the property value to Boolean#FALSE. org.jcp.xml.dsig.validateManifests javax.xml.crypto.dsig.cacheReference.		Map
camel.component.xmlsecurity-verify.disallow-doctype-decl	Disallows that the incoming XML document contains DTD DOCTYPE declaration. The default value is Boolean#TRUE.	true	Boolean
camel.component.xmlsecurity-verify.enabled	Whether to enable auto configuration of the xmlsecurity-verify component. This is enabled by default.		Boolean
camel.component.xmlsecurity-verify.key-selector	Provides the key for validating the XML signature. The option is a javax.xml.crypto.KeySelector type.		KeySelector
camel.component.xmlsecurity-verify.lazy-start-producer	Whether the producer should be started lazy (on the first message). By starting lazy you can use this to allow CamelContext and routes to startup in situations where a producer may otherwise fail during starting and cause the route to fail being started. By deferring this startup to be lazy then the startup failure can be handled during routing messages via Camel’s routing error handlers. Beware that when the first message is processed then creating and starting the producer may take a little time and prolong the total processing time of the processing.	false	Boolean
camel.component.xmlsecurity-verify.omit-xml-declaration	Indicator whether the XML declaration in the outgoing message body should be omitted. Default value is false. Can be overwritten by the header XmlSignatureConstants#HEADER_OMIT_XML_DECLARATION.	false	Boolean
camel.component.xmlsecurity-verify.output-node-search-type	Determines the search type for determining the output node which is serialized into the output message bodyF. See setOutputNodeSearch(Object). The supported default search types you can find in DefaultXmlSignature2Message.	Default	String
camel.component.xmlsecurity-verify.output-xml-encoding	The character encoding of the resulting signed XML document. If null then the encoding of the original XML document is used.		String
camel.component.xmlsecurity-verify.remove-signature-elements	Indicator whether the XML signature elements (elements with local name Signature and namesapce http://www.w3.org/2000/09/xmldsig#) shall be removed from the document set to the output message. Normally, this is only necessary, if the XML signature is enveloped. The default value is Boolean#FALSE. This parameter is forwarded to XmlSignature2Message. This indicator has no effect if the output node search is of type DefaultXmlSignature2Message#OUTPUT_NODE_SEARCH_TYPE_DEFAULT.F.	false	Boolean
camel.component.xmlsecurity-verify.schema-resource-uri	Classpath to the XML Schema. Must be specified in the detached XML Signature case for determining the ID attributes, might be set in the enveloped and enveloping case. If set, then the XML document is validated with the specified XML schema. The schema resource URI can be overwritten by the header XmlSignatureConstants#HEADER_SCHEMA_RESOURCE_URI.		String
camel.component.xmlsecurity-verify.secure-validation	Enables secure validation. If true then secure validation is enabled.	true	Boolean
camel.component.xmlsecurity-verify.uri-dereferencer	If you want to restrict the remote access via reference URIs, you can set an own dereferencer. Optional parameter. If not set the provider default dereferencer is used which can resolve URI fragments, HTTP, file and XPpointer URIs. Attention: The implementation is provider dependent!. The option is a javax.xml.crypto.URIDereferencer type.		URIDereferencer
camel.component.xmlsecurity-verify.validation-failed-handler	Handles the different validation failed situations. The default implementation throws specific exceptions for the different situations (All exceptions have the package name org.apache.camel.component.xmlsecurity.api and are a sub-class of XmlSignatureInvalidException. If the signature value validation fails, a XmlSignatureInvalidValueException is thrown. If a reference validation fails, a XmlSignatureInvalidContentHashException is thrown. For more detailed information, see the JavaDoc. The option is a org.apache.camel.component.xmlsecurity.api.ValidationFailedHandler type.		ValidationFailedHandler
camel.component.xmlsecurity-verify.verifier-configuration	To use a shared XmlVerifierConfiguration configuration to use as base for configuring endpoints. The option is a org.apache.camel.component.xmlsecurity.processor.XmlVerifierConfiguration type.		XmlVerifierConfiguration
camel.component.xmlsecurity-verify.xml-signature-checker	This interface allows the application to check the XML signature before the validation is executed. This step is recommended in http://www.w3.org/TR/xmldsig-bestpractices/#check-what-is-signed. The option is a org.apache.camel.component.xmlsecurity.api.XmlSignatureChecker type.		XmlSignatureChecker
camel.component.xmlsecurity-verify.xml-signature2-message	Bean which maps the XML signature to the output-message after the validation. How this mapping should be done can be configured by the options outputNodeSearchType, outputNodeSearch, and removeSignatureElements. The default implementation offers three possibilities which are related to the three output node search types Default, ElementName, and XPath. The default implementation determines a node which is then serialized and set to the body of the output message If the search type is ElementName then the output node (which must be in this case an element) is determined by the local name and namespace defined in the search value (see option outputNodeSearch). If the search type is XPath then the output node is determined by the XPath specified in the search value (in this case the output node can be of type Element, TextNode or Document). If the output node search type is Default then the following rules apply: In the enveloped XML signature case (there is a reference with URI= and transform http://www.w3.org/2000/09/xmldsig#enveloped-signature), the incoming XML document without the Signature element is set to the output message body. In the non-enveloped XML signature case, the message body is determined from a referenced Object; this is explained in more detail in chapter Output Node Determination in Enveloping XML Signature Case. The option is a org.apache.camel.component.xmlsecurity.api.XmlSignature2Message type.		XmlSignature2Message
camel.dataformat.xml-security.add-key-value-for-encrypted-key	Whether to add the public key used to encrypt the session key as a KeyValue in the EncryptedKey structure or not.	true	Boolean
camel.dataformat.xml-security.digest-algorithm	The digest algorithm to use with the RSA OAEP algorithm. The available choices are: XMLCipher.SHA1 XMLCipher.SHA256 XMLCipher.SHA512 The default value is XMLCipher.SHA1.	SHA1	String
camel.dataformat.xml-security.enabled	Whether to enable auto configuration of the xmlSecurity data format. This is enabled by default.		Boolean
camel.dataformat.xml-security.key-cipher-algorithm	The cipher algorithm to be used for encryption/decryption of the asymmetric key. The available choices are: XMLCipher.RSA_v1dot5 XMLCipher.RSA_OAEP XMLCipher.RSA_OAEP_11 The default value is XMLCipher.RSA_OAEP.	RSA_OAEP	String
camel.dataformat.xml-security.key-or-trust-store-parameters-ref	Refers to a KeyStore instance to lookup in the registry, which is used for configuration options for creating and loading a KeyStore instance that represents the sender’s trustStore or recipient’s keyStore.		String
camel.dataformat.xml-security.key-password	The password to be used for retrieving the private key from the KeyStore. This key is used for asymmetric decryption.		String
camel.dataformat.xml-security.mgf-algorithm	The MGF Algorithm to use with the RSA OAEP algorithm. The available choices are: EncryptionConstants.MGF1_SHA1 EncryptionConstants.MGF1_SHA256 EncryptionConstants.MGF1_SHA512 The default value is EncryptionConstants.MGF1_SHA1.	MGF1_SHA1	String
camel.dataformat.xml-security.pass-phrase	A String used as passPhrase to encrypt/decrypt content. The passPhrase has to be provided. The passPhrase needs to be put together in conjunction with the appropriate encryption algorithm. For example using TRIPLEDES the passPhase can be a Only another 24 Byte key.		String
camel.dataformat.xml-security.pass-phrase-byte	A byte used as passPhrase to encrypt/decrypt content. The passPhrase has to be provided. The passPhrase needs to be put together in conjunction with the appropriate encryption algorithm. For example using TRIPLEDES the passPhase can be a Only another 24 Byte key.		Byte[]
camel.dataformat.xml-security.recipient-key-alias	The key alias to be used when retrieving the recipient’s public or private key from a KeyStore when performing asymmetric key encryption or decryption.		String
camel.dataformat.xml-security.secure-tag	The XPath reference to the XML Element selected for encryption/decryption. If no tag is specified, the entire payload is encrypted/decrypted.		String
camel.dataformat.xml-security.secure-tag-contents	A boolean value to specify whether the XML Element is to be encrypted or the contents of the XML Element. false = Element Level. true = Element Content Level.	false	Boolean
camel.dataformat.xml-security.xml-cipher-algorithm	The cipher algorithm to be used for encryption/decryption of the XML message content. The available choices are: XMLCipher.TRIPLEDES XMLCipher.AES_128 XMLCipher.AES_128_GCM XMLCipher.AES_192 XMLCipher.AES_192_GCM XMLCipher.AES_256 XMLCipher.AES_256_GCM XMLCipher.SEED_128 XMLCipher.CAMELLIA_128 XMLCipher.CAMELLIA_192 XMLCipher.CAMELLIA_256 The default value is XMLCipher.AES_256_GCM.	AES-256-GCM	String

Name

Description

Default

Type

camel.component.xmlsecurity-sign.add-key-info-reference

In order to protect the KeyInfo element from tampering you can add a reference to the signed info element so that it is protected via the signature value. The default value is true. Only relevant when a KeyInfo is returned by KeyAccessor. and KeyInfo#getId() is not null.

true

Boolean

camel.component.xmlsecurity-sign.autowired-enabled

true

Boolean

camel.component.xmlsecurity-sign.base-uri

You can set a base URI which is used in the URI dereferencing. Relative URIs are then concatenated with the base URI.

String

camel.component.xmlsecurity-sign.canonicalization-method

Canonicalization method used to canonicalize the SignedInfo element before the digest is calculated. You can use the helper methods XmlSignatureHelper.getCanonicalizationMethod(String algorithm) or getCanonicalizationMethod(String algorithm, List inclusiveNamespacePrefixes) to create a canonicalization method. The option is a javax.xml.crypto.AlgorithmMethod type.

AlgorithmMethod

camel.component.xmlsecurity-sign.clear-headers

Determines if the XML signature specific headers be cleared after signing and verification. Defaults to true.

true

Boolean

camel.component.xmlsecurity-sign.content-object-id

Sets the content object Id attribute value. By default a UUID is generated. If you set the null value, then a new UUID will be generated. Only used in the enveloping case.

String

camel.component.xmlsecurity-sign.content-reference-type

Type of the content reference. The default value is null. This value can be overwritten by the header XmlSignatureConstants#HEADER_CONTENT_REFERENCE_TYPE.

String

camel.component.xmlsecurity-sign.content-reference-uri

Reference URI for the content to be signed. Only used in the enveloped case. If the reference URI contains an ID attribute value, then the resource schema URI ( setSchemaResourceUri(String)) must also be set because the schema validator will then find out which attributes are ID attributes. Will be ignored in the enveloping or detached case.

String

camel.component.xmlsecurity-sign.crypto-context-properties

Map

camel.component.xmlsecurity-sign.digest-algorithm

Digest algorithm URI. Optional parameter. This digest algorithm is used for calculating the digest of the input message. If this digest algorithm is not specified then the digest algorithm is calculated from the signature algorithm. Example: http://www.w3.org/2001/04/xmlenc#sha256.

String

camel.component.xmlsecurity-sign.disallow-doctype-decl

Disallows that the incoming XML document contains DTD DOCTYPE declaration. The default value is Boolean#TRUE.

true

Boolean

camel.component.xmlsecurity-sign.enabled

Whether to enable auto configuration of the xmlsecurity-sign component. This is enabled by default.

Boolean

camel.component.xmlsecurity-sign.key-accessor

For the signing process, a private key is necessary. You specify a key accessor bean which provides this private key. The key accessor bean must implement the KeyAccessor interface. The package org.apache.camel.component.xmlsecurity.api contains the default implementation class DefaultKeyAccessor which reads the private key from a Java keystore. The option is a org.apache.camel.component.xmlsecurity.api.KeyAccessor type.

KeyAccessor

camel.component.xmlsecurity-sign.lazy-start-producer

false

Boolean

camel.component.xmlsecurity-sign.omit-xml-declaration

Indicator whether the XML declaration in the outgoing message body should be omitted. Default value is false. Can be overwritten by the header XmlSignatureConstants#HEADER_OMIT_XML_DECLARATION.

false

Boolean

camel.component.xmlsecurity-sign.output-xml-encoding

The character encoding of the resulting signed XML document. If null then the encoding of the original XML document is used.

String

camel.component.xmlsecurity-sign.parent-local-name

Local name of the parent element to which the XML signature element will be added. Only relevant for enveloped XML signature. Alternatively you can also use setParentXpath(XPathFilterParameterSpec). Default value is null. The value must be null for enveloping and detached XML signature. This parameter or the parameter setParentXpath(XPathFilterParameterSpec) for enveloped signature and the parameter setXpathsToIdAttributes(List) for detached signature must not be set in the same configuration. If the parameters parentXpath and parentLocalName are specified in the same configuration then an exception is thrown.

String

camel.component.xmlsecurity-sign.parent-namespace

Namespace of the parent element to which the XML signature element will be added.

String

camel.component.xmlsecurity-sign.parent-xpath

Sets the XPath to find the parent node in the enveloped case. Either you specify the parent node via this method or the local name and namespace of the parent with the methods setParentLocalName(String) and setParentNamespace(String). Default value is null. The value must be null for enveloping and detached XML signature. If the parameters parentXpath and parentLocalName are specified in the same configuration then an exception is thrown. The option is a javax.xml.crypto.dsig.spec.XPathFilterParameterSpec type.

XPathFilterParameterSpec

camel.component.xmlsecurity-sign.plain-text

Indicator whether the message body contains plain text. The default value is false, indicating that the message body contains XML. The value can be overwritten by the header XmlSignatureConstants#HEADER_MESSAGE_IS_PLAIN_TEXT.

false

Boolean

camel.component.xmlsecurity-sign.plain-text-encoding

Encoding of the plain text. Only relevant if the message body is plain text (see parameter plainText. Default value is UTF-8.

UTF-8

String

camel.component.xmlsecurity-sign.prefix-for-xml-signature-namespace

Namespace prefix for the XML signature namespace http://www.w3.org/2000/09/xmldsig#. Default value is ds. If null or an empty value is set then no prefix is used for the XML signature namespace. See best practice http://www.w3.org/TR/xmldsig-bestpractices/#signing-xml- without-namespaces.

String

camel.component.xmlsecurity-sign.properties

For adding additional References and Objects to the XML signature which contain additional properties, you can provide a bean which implements the XmlSignatureProperties interface. The option is a org.apache.camel.component.xmlsecurity.api.XmlSignatureProperties type.

XmlSignatureProperties

camel.component.xmlsecurity-sign.schema-resource-uri

String

camel.component.xmlsecurity-sign.signature-algorithm

Signature algorithm. Default value is http://www.w3.org/2000/09/xmldsig#rsa-sha1.

http://www.w3.org/2001/04/xmldsig-more#rsa-sha256

String

camel.component.xmlsecurity-sign.signature-id

Sets the signature Id. If this parameter is not set (null value) then a unique ID is generated for the signature ID (default). If this parameter is set to (empty string) then no Id attribute is created in the signature element.

String

camel.component.xmlsecurity-sign.signer-configuration

To use a shared XmlSignerConfiguration configuration to use as base for configuring endpoints. The option is a org.apache.camel.component.xmlsecurity.processor.XmlSignerConfiguration type.

XmlSignerConfiguration

camel.component.xmlsecurity-sign.transform-methods

Transforms which are executed on the message body before the digest is calculated. By default, C14n is added and in the case of enveloped signature (see option parentLocalName) also http://www.w3.org/2000/09/xmldsig#enveloped-signature is added at position 0 of the list. Use methods in XmlSignatureHelper to create the transform methods.

List

camel.component.xmlsecurity-sign.uri-dereferencer

URIDereferencer

camel.component.xmlsecurity-sign.xpaths-to-id-attributes

Define the elements which are signed in the detached case via XPATH expressions to ID attributes (attributes of type ID). For each element found via the XPATH expression a detached signature is created whose reference URI contains the corresponding attribute value (preceded by '#'). The signature becomes the last sibling of the signed element. Elements with deeper hierarchy level are signed first. You can also set the XPATH list dynamically via the header XmlSignatureConstants#HEADER_XPATHS_TO_ID_ATTRIBUTES. The parameter setParentLocalName(String) or setParentXpath(XPathFilterParameterSpec) for enveloped signature and this parameter for detached signature must not be set in the same configuration.

List

camel.component.xmlsecurity-verify.autowired-enabled

true

Boolean

camel.component.xmlsecurity-verify.base-uri

You can set a base URI which is used in the URI dereferencing. Relative URIs are then concatenated with the base URI.

String

camel.component.xmlsecurity-verify.clear-headers

Determines if the XML signature specific headers be cleared after signing and verification. Defaults to true.

true

Boolean

camel.component.xmlsecurity-verify.crypto-context-properties

Map

camel.component.xmlsecurity-verify.disallow-doctype-decl

Disallows that the incoming XML document contains DTD DOCTYPE declaration. The default value is Boolean#TRUE.

true

Boolean

camel.component.xmlsecurity-verify.enabled

Whether to enable auto configuration of the xmlsecurity-verify component. This is enabled by default.

Boolean

camel.component.xmlsecurity-verify.key-selector

Provides the key for validating the XML signature. The option is a javax.xml.crypto.KeySelector type.

KeySelector

camel.component.xmlsecurity-verify.lazy-start-producer

false

Boolean

camel.component.xmlsecurity-verify.omit-xml-declaration

Indicator whether the XML declaration in the outgoing message body should be omitted. Default value is false. Can be overwritten by the header XmlSignatureConstants#HEADER_OMIT_XML_DECLARATION.

false

Boolean

camel.component.xmlsecurity-verify.output-node-search-type

Default

String

camel.component.xmlsecurity-verify.output-xml-encoding

The character encoding of the resulting signed XML document. If null then the encoding of the original XML document is used.

String

camel.component.xmlsecurity-verify.remove-signature-elements

false

Boolean

camel.component.xmlsecurity-verify.schema-resource-uri

String

camel.component.xmlsecurity-verify.secure-validation

Enables secure validation. If true then secure validation is enabled.

true

Boolean

camel.component.xmlsecurity-verify.uri-dereferencer

URIDereferencer

camel.component.xmlsecurity-verify.validation-failed-handler

ValidationFailedHandler

camel.component.xmlsecurity-verify.verifier-configuration

To use a shared XmlVerifierConfiguration configuration to use as base for configuring endpoints. The option is a org.apache.camel.component.xmlsecurity.processor.XmlVerifierConfiguration type.

XmlVerifierConfiguration

camel.component.xmlsecurity-verify.xml-signature-checker

This interface allows the application to check the XML signature before the validation is executed. This step is recommended in http://www.w3.org/TR/xmldsig-bestpractices/#check-what-is-signed. The option is a org.apache.camel.component.xmlsecurity.api.XmlSignatureChecker type.

XmlSignatureChecker

camel.component.xmlsecurity-verify.xml-signature2-message

XmlSignature2Message

camel.dataformat.xml-security.add-key-value-for-encrypted-key

Whether to add the public key used to encrypt the session key as a KeyValue in the EncryptedKey structure or not.

true

Boolean

camel.dataformat.xml-security.digest-algorithm

The digest algorithm to use with the RSA OAEP algorithm. The available choices are: XMLCipher.SHA1 XMLCipher.SHA256 XMLCipher.SHA512 The default value is XMLCipher.SHA1.

SHA1

String

camel.dataformat.xml-security.enabled

Whether to enable auto configuration of the xmlSecurity data format. This is enabled by default.

Boolean

camel.dataformat.xml-security.key-cipher-algorithm

The cipher algorithm to be used for encryption/decryption of the asymmetric key. The available choices are: XMLCipher.RSA_v1dot5 XMLCipher.RSA_OAEP XMLCipher.RSA_OAEP_11 The default value is XMLCipher.RSA_OAEP.

RSA_OAEP

String

camel.dataformat.xml-security.key-or-trust-store-parameters-ref

Refers to a KeyStore instance to lookup in the registry, which is used for configuration options for creating and loading a KeyStore instance that represents the sender’s trustStore or recipient’s keyStore.

String

camel.dataformat.xml-security.key-password

The password to be used for retrieving the private key from the KeyStore. This key is used for asymmetric decryption.

String

camel.dataformat.xml-security.mgf-algorithm

The MGF Algorithm to use with the RSA OAEP algorithm. The available choices are: EncryptionConstants.MGF1_SHA1 EncryptionConstants.MGF1_SHA256 EncryptionConstants.MGF1_SHA512 The default value is EncryptionConstants.MGF1_SHA1.

MGF1_SHA1

String

camel.dataformat.xml-security.pass-phrase

A String used as passPhrase to encrypt/decrypt content. The passPhrase has to be provided. The passPhrase needs to be put together in conjunction with the appropriate encryption algorithm. For example using TRIPLEDES the passPhase can be a Only another 24 Byte key.

String

camel.dataformat.xml-security.pass-phrase-byte

A byte used as passPhrase to encrypt/decrypt content. The passPhrase has to be provided. The passPhrase needs to be put together in conjunction with the appropriate encryption algorithm. For example using TRIPLEDES the passPhase can be a Only another 24 Byte key.

Byte[]

camel.dataformat.xml-security.recipient-key-alias

The key alias to be used when retrieving the recipient’s public or private key from a KeyStore when performing asymmetric key encryption or decryption.

String

camel.dataformat.xml-security.secure-tag

The XPath reference to the XML Element selected for encryption/decryption. If no tag is specified, the entire payload is encrypted/decrypted.

String

camel.dataformat.xml-security.secure-tag-contents

A boolean value to specify whether the XML Element is to be encrypted or the contents of the XML Element. false = Element Level. true = Element Content Level.

false

Boolean

camel.dataformat.xml-security.xml-cipher-algorithm

The cipher algorithm to be used for encryption/decryption of the XML message content. The available choices are: XMLCipher.TRIPLEDES XMLCipher.AES_128 XMLCipher.AES_128_GCM XMLCipher.AES_192 XMLCipher.AES_192_GCM XMLCipher.AES_256 XMLCipher.AES_256_GCM XMLCipher.SEED_128 XMLCipher.CAMELLIA_128 XMLCipher.CAMELLIA_192 XMLCipher.CAMELLIA_256 The default value is XMLCipher.AES_256_GCM.

AES-256-GCM

String