Olingo2

URI format

olingo2://endpoint/<resource-path>?[options]

Configuring Options

Camel components are configured on two separate levels:

component level
endpoint level

Configuring Component Options

At the component level, you set general and shared configurations that are, then, inherited by the endpoints. It is the highest configuration level.

For example, a component may have security settings, credentials for authentication, urls for network connection and so forth.

Some components only have a few options, and others may have many. Because components typically have pre-configured defaults that are commonly used, then you may often only need to configure a few options on a component; or none at all.

You can configure components using:

the Component DSL.
in a configuration file (application.properties, *.yaml files, etc).
directly in the Java code.

Configuring Endpoint Options

You usually spend more time setting up endpoints because they have many options. These options help you customize what you want the endpoint to do. The options are also categorized into whether the endpoint is used as a consumer (from), as a producer (to), or both.

Configuring endpoints is most often done directly in the endpoint URI as path and query parameters. You can also use the Endpoint DSL and DataFormat DSL as a type safe way of configuring endpoints and data formats in Java.

A good practice when configuring options is to use Property Placeholders.

Property placeholders provide a few benefits:

They help prevent using hardcoded urls, port numbers, sensitive information, and other settings.
They allow externalizing the configuration from the code.
They help the code to become more flexible and reusable.

The following two sections list all the options, firstly for the component followed by the endpoint.

Component Options

The Olingo2 component supports 18 options, which are listed below.

Name	Description	Default	Type
configuration (common)	To use the shared configuration.		Olingo2Configuration
connectTimeout (common)	HTTP connection creation timeout in milliseconds, defaults to 30,000 (30 seconds).	30000	int
contentType (common)	Content-Type header value can be used to specify JSON or XML message format, defaults to application/json;charset=utf-8.	application/json;charset=utf-8	String
entityProviderReadProperties (common)	Custom entity provider read properties applied to all read operations.		EntityProviderReadProperties
entityProviderWriteProperties (common)	Custom entity provider write properties applied to create, update, patch, batch and merge operations. For instance users can skip the Json object wrapper or enable content only mode when sending request data. A service URI set in the properties will always be overwritten by the serviceUri configuration parameter. Please consider to using the serviceUri configuration parameter instead of setting the respective write property here.		EntityProviderWriteProperties
filterAlreadySeen (common)	Set this to true to filter out results that have already been communicated by this component.	false	boolean
httpHeaders (common)	Custom HTTP headers to inject into every request, this could include OAuth tokens, etc.		Map
proxy (common)	HTTP proxy server configuration.		HttpHost
serviceUri (common)	Target OData service base URI, e.g. http://services.odata.org/OData/OData.svc.		String
socketTimeout (common)	HTTP request timeout in milliseconds, defaults to 30,000 (30 seconds).	30000	int
bridgeErrorHandler (consumer)	Allows for bridging the consumer to the Camel routing Error Handler, which mean any exceptions (if possible) occurred while the Camel consumer is trying to pickup incoming messages, or the likes, will now be processed as a message and handled by the routing Error Handler. Important: This is only possible if the 3rd party component allows Camel to be alerted if an exception was thrown. Some components handle this internally only, and therefore bridgeErrorHandler is not possible. In other situations we may improve the Camel component to hook into the 3rd party component and make this possible for future releases. By default the consumer will use the org.apache.camel.spi.ExceptionHandler to deal with exceptions, that will be logged at WARN or ERROR level and ignored.	false	boolean
splitResult (consumer)	For endpoints that return an array or collection, a consumer endpoint will map every element to distinct messages, unless splitResult is set to false.	true	boolean
lazyStartProducer (producer)	Whether the producer should be started lazy (on the first message). By starting lazy you can use this to allow CamelContext and routes to startup in situations where a producer may otherwise fail during starting and cause the route to fail being started. By deferring this startup to be lazy then the startup failure can be handled during routing messages via Camel’s routing error handlers. Beware that when the first message is processed then creating and starting the producer may take a little time and prolong the total processing time of the processing.	false	boolean
autowiredEnabled (advanced)	Whether autowiring is enabled. This is used for automatic autowiring options (the option must be marked as autowired) by looking up in the registry to find if there is a single instance of matching type, which then gets configured on the component. This can be used for automatic configuring JDBC data sources, JMS connection factories, AWS Clients, etc.	true	boolean
httpAsyncClientBuilder (advanced)	Custom HTTP async client builder for more complex HTTP client configuration, overrides connectionTimeout, socketTimeout, proxy and sslContext. Note that a socketTimeout MUST be specified in the builder, otherwise OData requests could block indefinitely.		HttpAsyncClientBuilder
httpClientBuilder (advanced)	Custom HTTP client builder for more complex HTTP client configuration, overrides connectionTimeout, socketTimeout, proxy and sslContext. Note that a socketTimeout MUST be specified in the builder, otherwise OData requests could block indefinitely.		HttpClientBuilder
sslContextParameters (security)	To configure security using SSLContextParameters.		SSLContextParameters
useGlobalSslContextParameters (security)	Enable usage of global SSL context parameters.	false	boolean

Name

Description

Default

Type

configuration (common)

To use the shared configuration.

Olingo2Configuration

connectTimeout (common)

HTTP connection creation timeout in milliseconds, defaults to 30,000 (30 seconds).

30000

int

contentType (common)

Content-Type header value can be used to specify JSON or XML message format, defaults to application/json;charset=utf-8.

application/json;charset=utf-8

String

entityProviderReadProperties (common)

Custom entity provider read properties applied to all read operations.

EntityProviderReadProperties

entityProviderWriteProperties (common)

Custom entity provider write properties applied to create, update, patch, batch and merge operations. For instance users can skip the Json object wrapper or enable content only mode when sending request data. A service URI set in the properties will always be overwritten by the serviceUri configuration parameter. Please consider to using the serviceUri configuration parameter instead of setting the respective write property here.

EntityProviderWriteProperties

filterAlreadySeen (common)

Set this to true to filter out results that have already been communicated by this component.

false

boolean

httpHeaders (common)

Custom HTTP headers to inject into every request, this could include OAuth tokens, etc.

Map

proxy (common)

HTTP proxy server configuration.

HttpHost

serviceUri (common)

Target OData service base URI, e.g. http://services.odata.org/OData/OData.svc.

String

socketTimeout (common)

HTTP request timeout in milliseconds, defaults to 30,000 (30 seconds).

30000

int

bridgeErrorHandler (consumer)

Allows for bridging the consumer to the Camel routing Error Handler, which mean any exceptions (if possible) occurred while the Camel consumer is trying to pickup incoming messages, or the likes, will now be processed as a message and handled by the routing Error Handler. Important: This is only possible if the 3rd party component allows Camel to be alerted if an exception was thrown. Some components handle this internally only, and therefore bridgeErrorHandler is not possible. In other situations we may improve the Camel component to hook into the 3rd party component and make this possible for future releases. By default the consumer will use the org.apache.camel.spi.ExceptionHandler to deal with exceptions, that will be logged at WARN or ERROR level and ignored.

false

boolean

splitResult (consumer)

For endpoints that return an array or collection, a consumer endpoint will map every element to distinct messages, unless splitResult is set to false.

true

boolean

lazyStartProducer (producer)

Whether the producer should be started lazy (on the first message). By starting lazy you can use this to allow CamelContext and routes to startup in situations where a producer may otherwise fail during starting and cause the route to fail being started. By deferring this startup to be lazy then the startup failure can be handled during routing messages via Camel’s routing error handlers. Beware that when the first message is processed then creating and starting the producer may take a little time and prolong the total processing time of the processing.

false

boolean

autowiredEnabled (advanced)

Whether autowiring is enabled. This is used for automatic autowiring options (the option must be marked as autowired) by looking up in the registry to find if there is a single instance of matching type, which then gets configured on the component. This can be used for automatic configuring JDBC data sources, JMS connection factories, AWS Clients, etc.

true

boolean

httpAsyncClientBuilder (advanced)

Custom HTTP async client builder for more complex HTTP client configuration, overrides connectionTimeout, socketTimeout, proxy and sslContext. Note that a socketTimeout MUST be specified in the builder, otherwise OData requests could block indefinitely.

HttpAsyncClientBuilder

httpClientBuilder (advanced)

Custom HTTP client builder for more complex HTTP client configuration, overrides connectionTimeout, socketTimeout, proxy and sslContext. Note that a socketTimeout MUST be specified in the builder, otherwise OData requests could block indefinitely.

HttpClientBuilder

sslContextParameters (security)

To configure security using SSLContextParameters.

SSLContextParameters

useGlobalSslContextParameters (security)

Enable usage of global SSL context parameters.

false

boolean

Endpoint Options

The Olingo2 endpoint is configured using URI syntax:

olingo2:apiName/methodName

With the following path and query parameters:

Path Parameters (2 parameters)

Name	Description	Default	Type
apiName (common)	Required What kind of operation to perform. Enum values: DEFAULT		Olingo2ApiName
methodName (common)	Required What sub operation to use for the selected operation.		String

Name

Description

Default

Type

apiName (common)

Required What kind of operation to perform.

Enum values:

DEFAULT

Olingo2ApiName

methodName (common)

Required What sub operation to use for the selected operation.

String

Query Parameters (34 parameters)

Name	Description	Default	Type
connectTimeout (common)	HTTP connection creation timeout in milliseconds, defaults to 30,000 (30 seconds).	30000	int
contentType (common)	Content-Type header value can be used to specify JSON or XML message format, defaults to application/json;charset=utf-8.	application/json;charset=utf-8	String
entityProviderReadProperties (common)	Custom entity provider read properties applied to all read operations.		EntityProviderReadProperties
entityProviderWriteProperties (common)	Custom entity provider write properties applied to create, update, patch, batch and merge operations. For instance users can skip the Json object wrapper or enable content only mode when sending request data. A service URI set in the properties will always be overwritten by the serviceUri configuration parameter. Please consider to using the serviceUri configuration parameter instead of setting the respective write property here.		EntityProviderWriteProperties
filterAlreadySeen (common)	Set this to true to filter out results that have already been communicated by this component.	false	boolean
httpHeaders (common)	Custom HTTP headers to inject into every request, this could include OAuth tokens, etc.		Map
inBody (common)	Sets the name of a parameter to be passed in the exchange In Body.		String
proxy (common)	HTTP proxy server configuration.		HttpHost
serviceUri (common)	Target OData service base URI, e.g. http://services.odata.org/OData/OData.svc.		String
socketTimeout (common)	HTTP request timeout in milliseconds, defaults to 30,000 (30 seconds).	30000	int
sendEmptyMessageWhenIdle (consumer)	If the polling consumer did not poll any files, you can enable this option to send an empty message (no body) instead.	false	boolean
splitResult (consumer)	For endpoints that return an array or collection, a consumer endpoint will map every element to distinct messages, unless splitResult is set to false.	true	boolean
bridgeErrorHandler (consumer (advanced))	Allows for bridging the consumer to the Camel routing Error Handler, which mean any exceptions (if possible) occurred while the Camel consumer is trying to pickup incoming messages, or the likes, will now be processed as a message and handled by the routing Error Handler. Important: This is only possible if the 3rd party component allows Camel to be alerted if an exception was thrown. Some components handle this internally only, and therefore bridgeErrorHandler is not possible. In other situations we may improve the Camel component to hook into the 3rd party component and make this possible for future releases. By default the consumer will use the org.apache.camel.spi.ExceptionHandler to deal with exceptions, that will be logged at WARN or ERROR level and ignored.	false	boolean
exceptionHandler (consumer (advanced))	To let the consumer use a custom ExceptionHandler. Notice if the option bridgeErrorHandler is enabled then this option is not in use. By default the consumer will deal with exceptions, that will be logged at WARN or ERROR level and ignored.		ExceptionHandler
exchangePattern (consumer (advanced))	Sets the exchange pattern when the consumer creates an exchange. Enum values: InOnly InOut		ExchangePattern
pollStrategy (consumer (advanced))	A pluggable org.apache.camel.PollingConsumerPollingStrategy allowing you to provide your custom implementation to control error handling usually occurred during the poll operation before an Exchange have been created and being routed in Camel.		PollingConsumerPollStrategy
lazyStartProducer (producer (advanced))	Whether the producer should be started lazy (on the first message). By starting lazy you can use this to allow CamelContext and routes to startup in situations where a producer may otherwise fail during starting and cause the route to fail being started. By deferring this startup to be lazy then the startup failure can be handled during routing messages via Camel’s routing error handlers. Beware that when the first message is processed then creating and starting the producer may take a little time and prolong the total processing time of the processing.	false	boolean
httpAsyncClientBuilder (advanced)	Custom HTTP async client builder for more complex HTTP client configuration, overrides connectionTimeout, socketTimeout, proxy and sslContext. Note that a socketTimeout MUST be specified in the builder, otherwise OData requests could block indefinitely.		HttpAsyncClientBuilder
httpClientBuilder (advanced)	Custom HTTP client builder for more complex HTTP client configuration, overrides connectionTimeout, socketTimeout, proxy and sslContext. Note that a socketTimeout MUST be specified in the builder, otherwise OData requests could block indefinitely.		HttpClientBuilder
backoffErrorThreshold (scheduler)	The number of subsequent error polls (failed due some error) that should happen before the backoffMultipler should kick-in.		int
backoffIdleThreshold (scheduler)	The number of subsequent idle polls that should happen before the backoffMultipler should kick-in.		int
backoffMultiplier (scheduler)	To let the scheduled polling consumer backoff if there has been a number of subsequent idles/errors in a row. The multiplier is then the number of polls that will be skipped before the next actual attempt is happening again. When this option is in use then backoffIdleThreshold and/or backoffErrorThreshold must also be configured.		int
delay (scheduler)	Milliseconds before the next poll.	500	long
greedy (scheduler)	If greedy is enabled, then the ScheduledPollConsumer will run immediately again, if the previous run polled 1 or more messages.	false	boolean
initialDelay (scheduler)	Milliseconds before the first poll starts.	1000	long
repeatCount (scheduler)	Specifies a maximum limit of number of fires. So if you set it to 1, the scheduler will only fire once. If you set it to 5, it will only fire five times. A value of zero or negative means fire forever.	0	long
runLoggingLevel (scheduler)	The consumer logs a start/complete log line when it polls. This option allows you to configure the logging level for that. Enum values: TRACE DEBUG INFO WARN ERROR OFF	TRACE	LoggingLevel
scheduledExecutorService (scheduler)	Allows for configuring a custom/shared thread pool to use for the consumer. By default each consumer has its own single threaded thread pool.		ScheduledExecutorService
scheduler (scheduler)	To use a cron scheduler from either camel-spring or camel-quartz component. Use value spring or quartz for built in scheduler.	none	Object
schedulerProperties (scheduler)	To configure additional properties when using a custom scheduler or any of the Quartz, Spring based scheduler.		Map
startScheduler (scheduler)	Whether the scheduler should be auto started.	true	boolean
timeUnit (scheduler)	Time unit for initialDelay and delay options. Enum values: NANOSECONDS MICROSECONDS MILLISECONDS SECONDS MINUTES HOURS DAYS	MILLISECONDS	TimeUnit
useFixedDelay (scheduler)	Controls if fixed delay or fixed rate is used. See ScheduledExecutorService in JDK for details.	true	boolean
sslContextParameters (security)	To configure security using SSLContextParameters.		SSLContextParameters

Name

Description

Default

Type

connectTimeout (common)

HTTP connection creation timeout in milliseconds, defaults to 30,000 (30 seconds).

30000

int

contentType (common)

Content-Type header value can be used to specify JSON or XML message format, defaults to application/json;charset=utf-8.

application/json;charset=utf-8

String

entityProviderReadProperties (common)

Custom entity provider read properties applied to all read operations.

EntityProviderReadProperties

entityProviderWriteProperties (common)

Custom entity provider write properties applied to create, update, patch, batch and merge operations. For instance users can skip the Json object wrapper or enable content only mode when sending request data. A service URI set in the properties will always be overwritten by the serviceUri configuration parameter. Please consider to using the serviceUri configuration parameter instead of setting the respective write property here.

EntityProviderWriteProperties

filterAlreadySeen (common)

Set this to true to filter out results that have already been communicated by this component.

false

boolean

httpHeaders (common)

Custom HTTP headers to inject into every request, this could include OAuth tokens, etc.

Map

inBody (common)

Sets the name of a parameter to be passed in the exchange In Body.

String

proxy (common)

HTTP proxy server configuration.

HttpHost

serviceUri (common)

Target OData service base URI, e.g. http://services.odata.org/OData/OData.svc.

String

socketTimeout (common)

HTTP request timeout in milliseconds, defaults to 30,000 (30 seconds).

30000

int

sendEmptyMessageWhenIdle (consumer)

If the polling consumer did not poll any files, you can enable this option to send an empty message (no body) instead.

false

boolean

splitResult (consumer)

For endpoints that return an array or collection, a consumer endpoint will map every element to distinct messages, unless splitResult is set to false.

true

boolean

bridgeErrorHandler (consumer (advanced))

Allows for bridging the consumer to the Camel routing Error Handler, which mean any exceptions (if possible) occurred while the Camel consumer is trying to pickup incoming messages, or the likes, will now be processed as a message and handled by the routing Error Handler. Important: This is only possible if the 3rd party component allows Camel to be alerted if an exception was thrown. Some components handle this internally only, and therefore bridgeErrorHandler is not possible. In other situations we may improve the Camel component to hook into the 3rd party component and make this possible for future releases. By default the consumer will use the org.apache.camel.spi.ExceptionHandler to deal with exceptions, that will be logged at WARN or ERROR level and ignored.

false

boolean

exceptionHandler (consumer (advanced))

To let the consumer use a custom ExceptionHandler. Notice if the option bridgeErrorHandler is enabled then this option is not in use. By default the consumer will deal with exceptions, that will be logged at WARN or ERROR level and ignored.

ExceptionHandler

exchangePattern (consumer (advanced))

Sets the exchange pattern when the consumer creates an exchange.

Enum values:

InOnly
InOut

ExchangePattern

pollStrategy (consumer (advanced))

A pluggable org.apache.camel.PollingConsumerPollingStrategy allowing you to provide your custom implementation to control error handling usually occurred during the poll operation before an Exchange have been created and being routed in Camel.

PollingConsumerPollStrategy

lazyStartProducer (producer (advanced))

Whether the producer should be started lazy (on the first message). By starting lazy you can use this to allow CamelContext and routes to startup in situations where a producer may otherwise fail during starting and cause the route to fail being started. By deferring this startup to be lazy then the startup failure can be handled during routing messages via Camel’s routing error handlers. Beware that when the first message is processed then creating and starting the producer may take a little time and prolong the total processing time of the processing.

false

boolean

httpAsyncClientBuilder (advanced)

Custom HTTP async client builder for more complex HTTP client configuration, overrides connectionTimeout, socketTimeout, proxy and sslContext. Note that a socketTimeout MUST be specified in the builder, otherwise OData requests could block indefinitely.

HttpAsyncClientBuilder

httpClientBuilder (advanced)

Custom HTTP client builder for more complex HTTP client configuration, overrides connectionTimeout, socketTimeout, proxy and sslContext. Note that a socketTimeout MUST be specified in the builder, otherwise OData requests could block indefinitely.

HttpClientBuilder

backoffErrorThreshold (scheduler)

The number of subsequent error polls (failed due some error) that should happen before the backoffMultipler should kick-in.

int

backoffIdleThreshold (scheduler)

The number of subsequent idle polls that should happen before the backoffMultipler should kick-in.

int

backoffMultiplier (scheduler)

To let the scheduled polling consumer backoff if there has been a number of subsequent idles/errors in a row. The multiplier is then the number of polls that will be skipped before the next actual attempt is happening again. When this option is in use then backoffIdleThreshold and/or backoffErrorThreshold must also be configured.

int

delay (scheduler)

Milliseconds before the next poll.

500

long

greedy (scheduler)

If greedy is enabled, then the ScheduledPollConsumer will run immediately again, if the previous run polled 1 or more messages.

false

boolean

initialDelay (scheduler)

Milliseconds before the first poll starts.

1000

long

repeatCount (scheduler)

Specifies a maximum limit of number of fires. So if you set it to 1, the scheduler will only fire once. If you set it to 5, it will only fire five times. A value of zero or negative means fire forever.

0

long

runLoggingLevel (scheduler)

The consumer logs a start/complete log line when it polls. This option allows you to configure the logging level for that.

Enum values:

TRACE
DEBUG
INFO
WARN
ERROR
OFF

TRACE

LoggingLevel

scheduledExecutorService (scheduler)

Allows for configuring a custom/shared thread pool to use for the consumer. By default each consumer has its own single threaded thread pool.

ScheduledExecutorService

scheduler (scheduler)

To use a cron scheduler from either camel-spring or camel-quartz component. Use value spring or quartz for built in scheduler.

none

Object

schedulerProperties (scheduler)

To configure additional properties when using a custom scheduler or any of the Quartz, Spring based scheduler.

Map

startScheduler (scheduler)

Whether the scheduler should be auto started.

true

boolean

timeUnit (scheduler)

Time unit for initialDelay and delay options.

Enum values:

NANOSECONDS
MICROSECONDS
MILLISECONDS
SECONDS
MINUTES
HOURS
DAYS

MILLISECONDS

TimeUnit

useFixedDelay (scheduler)

Controls if fixed delay or fixed rate is used. See ScheduledExecutorService in JDK for details.

true

boolean

sslContextParameters (security)

To configure security using SSLContextParameters.

SSLContextParameters

API Parameters (1 APIs)

The Olingo2 endpoint is an API-based component and has additional parameters based on which API name and API method is used. The API name and API method is located in the endpoint URI as the apiName/methodName path parameters:

olingo2:apiName/methodName

There are 1 API names as listed in the table below:

API Name	Type	Description
DEFAULT	Both	Olingo2 Client Api Interface

API Name

Type

Description

DEFAULT

Both

Olingo2 Client Api Interface

Each API is documented in the following sections to come.

API: DEFAULT

Both producer and consumer are supported

The DEFAULT API is defined in the syntax as follows:

olingo2:DEFAULT/methodName?[parameters]

The 8 method(s) is(are) listed in the table below, followed by detailed syntax for each method. (API methods can have a shorthand alias name which can be used in the syntax instead of the name)

Method	Alias	Description
batch		Executes a batch request
create		Creates a new OData resource
delete		Deletes an OData resource and invokes callback with org
merge		Patches/merges an OData resource using HTTP MERGE
patch		Patches/merges an OData resource using HTTP PATCH
read		Reads an OData resource and invokes callback with appropriate result
update		Updates an OData resource
uread		Reads an OData resource and invokes callback with the unparsed input stream

Method

Alias

Description

batch

Executes a batch request

create

Creates a new OData resource

delete

Deletes an OData resource and invokes callback with org

merge

Patches/merges an OData resource using HTTP MERGE

patch

Patches/merges an OData resource using HTTP PATCH

read

Reads an OData resource and invokes callback with appropriate result

update

Updates an OData resource

uread

Reads an OData resource and invokes callback with the unparsed input stream

Method batch

Signatures:

void batch(org.apache.olingo.odata2.api.edm.Edm edm, java.util.Map<String, String> endpointHttpHeaders, Object data, org.apache.camel.component.olingo2.api.Olingo2ResponseHandler<java.util.List<org.apache.camel.component.olingo2.api.batch.Olingo2BatchResponse>> responseHandler);

The olingo2/batch API method has the parameters listed in the table below:

Parameter	Description	Type
data	Ordered org.apache.camel.component.olingo2.api.batch.Olingo2BatchRequest list	Object
edm	Service Edm	Edm
endpointHttpHeaders	HTTP Headers to add/override the component versions	Map
responseHandler	Callback handler	Olingo2ResponseHandler

Parameter

Description

Type

data

Ordered org.apache.camel.component.olingo2.api.batch.Olingo2BatchRequest list

Object

edm

Service Edm

Edm

endpointHttpHeaders

HTTP Headers to add/override the component versions

Map

responseHandler

Callback handler

Olingo2ResponseHandler

Method create

Signatures:

void create(org.apache.olingo.odata2.api.edm.Edm edm, String resourcePath, java.util.Map<String, String> endpointHttpHeaders, Object data, org.apache.camel.component.olingo2.api.Olingo2ResponseHandler responseHandler);

The olingo2/create API method has the parameters listed in the table below:

Parameter	Description	Type
data	Request data	Object
edm	Service Edm	Edm
endpointHttpHeaders	HTTP Headers to add/override the component versions	Map
resourcePath	Resource path to create	String
responseHandler	Callback handler	Olingo2ResponseHandler

Parameter

Description

Type

data

Request data

Object

edm

Service Edm

Edm

endpointHttpHeaders

HTTP Headers to add/override the component versions

Map

resourcePath

Resource path to create

String

responseHandler

Callback handler

Olingo2ResponseHandler

Method delete

Signatures:

void delete(String resourcePath, java.util.Map<String, String> endpointHttpHeaders, org.apache.camel.component.olingo2.api.Olingo2ResponseHandler<org.apache.olingo.odata2.api.commons.HttpStatusCodes> responseHandler);

The olingo2/delete API method has the parameters listed in the table below:

Parameter	Description	Type
endpointHttpHeaders	HTTP Headers to add/override the component versions	Map
resourcePath	Resource path for Entry	String
responseHandler	Org.apache.olingo.odata2.api.commons.HttpStatusCodes callback handler	Olingo2ResponseHandler

Parameter

Description

Type

endpointHttpHeaders

HTTP Headers to add/override the component versions

Map

resourcePath

Resource path for Entry

String

responseHandler

Org.apache.olingo.odata2.api.commons.HttpStatusCodes callback handler

Olingo2ResponseHandler

Method merge

Signatures:

void merge(org.apache.olingo.odata2.api.edm.Edm edm, String resourcePath, java.util.Map<String, String> endpointHttpHeaders, Object data, org.apache.camel.component.olingo2.api.Olingo2ResponseHandler responseHandler);

The olingo2/merge API method has the parameters listed in the table below:

Parameter	Description	Type
data	Patch/merge data	Object
edm	Service Edm	Edm
endpointHttpHeaders	HTTP Headers to add/override the component versions	Map
resourcePath	Resource path to update	String
responseHandler	Org.apache.olingo.odata2.api.ep.entry.ODataEntry callback handler	Olingo2ResponseHandler

Parameter

Description

Type

data

Patch/merge data

Object

edm

Service Edm

Edm

endpointHttpHeaders

HTTP Headers to add/override the component versions

Map

resourcePath

Resource path to update

String

responseHandler

Org.apache.olingo.odata2.api.ep.entry.ODataEntry callback handler

Olingo2ResponseHandler

Method patch

Signatures:

void patch(org.apache.olingo.odata2.api.edm.Edm edm, String resourcePath, java.util.Map<String, String> endpointHttpHeaders, Object data, org.apache.camel.component.olingo2.api.Olingo2ResponseHandler responseHandler);

The olingo2/patch API method has the parameters listed in the table below:

Parameter	Description	Type
data	Patch/merge data	Object
edm	Service Edm	Edm
endpointHttpHeaders	HTTP Headers to add/override the component versions	Map
resourcePath	Resource path to update	String
responseHandler	Org.apache.olingo.odata2.api.ep.entry.ODataEntry callback handler	Olingo2ResponseHandler

Parameter

Description

Type

data

Patch/merge data

Object

edm

Service Edm

Edm

endpointHttpHeaders

HTTP Headers to add/override the component versions

Map

resourcePath

Resource path to update

String

responseHandler

Org.apache.olingo.odata2.api.ep.entry.ODataEntry callback handler

Olingo2ResponseHandler

Method read

Signatures:

void read(org.apache.olingo.odata2.api.edm.Edm edm, String resourcePath, java.util.Map<String, String> queryParams, java.util.Map<String, String> endpointHttpHeaders, org.apache.camel.component.olingo2.api.Olingo2ResponseHandler responseHandler);

The olingo2/read API method has the parameters listed in the table below:

Parameter	Description	Type
edm	Service Edm, read from calling read(null, $metdata, null, responseHandler)	Edm
endpointHttpHeaders	HTTP Headers to add/override the component versions	Map
queryParams	OData query params from http://www.odata.org/documentation/odata-version-2-0/uri-conventions#SystemQueryOptions	Map
resourcePath	OData Resource path	String
responseHandler	Callback handler	Olingo2ResponseHandler

Parameter

Description

Type

edm

Service Edm, read from calling read(null, $metdata, null, responseHandler)

Edm

endpointHttpHeaders

HTTP Headers to add/override the component versions

Map

queryParams

OData query params from http://www.odata.org/documentation/odata-version-2-0/uri-conventions#SystemQueryOptions

Map

resourcePath

OData Resource path

String

responseHandler

Callback handler

Olingo2ResponseHandler

Method update

Signatures:

void update(org.apache.olingo.odata2.api.edm.Edm edm, String resourcePath, java.util.Map<String, String> endpointHttpHeaders, Object data, org.apache.camel.component.olingo2.api.Olingo2ResponseHandler responseHandler);

The olingo2/update API method has the parameters listed in the table below:

Parameter	Description	Type
data	Updated data	Object
edm	Service Edm	Edm
endpointHttpHeaders	HTTP Headers to add/override the component versions	Map
resourcePath	Resource path to update	String
responseHandler	Org.apache.olingo.odata2.api.ep.entry.ODataEntry callback handler	Olingo2ResponseHandler

Parameter

Description

Type

data

Updated data

Object

edm

Service Edm

Edm

endpointHttpHeaders

HTTP Headers to add/override the component versions

Map

resourcePath

Resource path to update

String

responseHandler

Org.apache.olingo.odata2.api.ep.entry.ODataEntry callback handler

Olingo2ResponseHandler

Method uread

Signatures:

void uread(org.apache.olingo.odata2.api.edm.Edm edm, String resourcePath, java.util.Map<String, String> queryParams, java.util.Map<String, String> endpointHttpHeaders, org.apache.camel.component.olingo2.api.Olingo2ResponseHandler<java.io.InputStream> responseHandler);

The olingo2/uread API method has the parameters listed in the table below:

Parameter	Description	Type
edm	Service Edm, read from calling read(null, $metdata, null, responseHandler)	Edm
endpointHttpHeaders	HTTP Headers to add/override the component versions	Map
queryParams	OData query params from http://www.odata.org/documentation/odata-version-2-0/uri-conventions#SystemQueryOptions	Map
resourcePath	OData Resource path	String
responseHandler	Callback handler	Olingo2ResponseHandler

Parameter

Description

Type

edm

Service Edm, read from calling read(null, $metdata, null, responseHandler)

Edm

endpointHttpHeaders

HTTP Headers to add/override the component versions

Map

queryParams

OData query params from http://www.odata.org/documentation/odata-version-2-0/uri-conventions#SystemQueryOptions

Map

resourcePath

OData Resource path

String

responseHandler

Callback handler

Olingo2ResponseHandler

In addition to the parameters above, the olingo2 API can also use any of the Query Parameters (34 parameters).

Any of the parameters can be provided in either the endpoint URI, or dynamically in a message header. The message header name must be of the format CamelOlingo2.parameter. The inBody parameter overrides message header, i.e., the endpoint parameter inBody=myParameterNameHere would override a CamelOlingo2.myParameterNameHere header.

Message Headers

The Olingo2 component supports 1 message header(s), which is/are listed below:

Name Description Default Type

Name	Description	Default	Type
CamelOlingo2.responseHttpHeaders (producer) Constant: `RESPONSE_HTTP_HEADERS`	The response Http headers.		Map

CamelOlingo2.responseHttpHeaders (producer)

Constant: RESPONSE_HTTP_HEADERS

The response Http headers.

Map

Endpoint HTTP Headers

The component level configuration property httpHeaders supplies static HTTP header information. However, some systems require dynamic header information to be passed to and received from the endpoint. A sample use case would be systems that require dynamic security tokens. The endpointHttpHeaders and responseHttpHeaders endpoint properties provide this capability. Set headers that need to be passed to the endpoint in the CamelOlingo2.endpointHttpHeaders property and the response headers will be returned in a CamelOlingo2.responseHttpHeaders property. Both properties are of the type java.util.Map<String, String>.

OData Resource Type Mapping

The result of read endpoint and data type of data option depends on the OData resource being queried, created or modified.

OData Resource Type Resource URI from resourcePath and keyPredicate In or Out Body Type

OData Resource Type	Resource URI from resourcePath and keyPredicate	In or Out Body Type
Entity data model	$metadata	`org.apache.olingo.odata2.api.edm.Edm`
Service document	/	`org.apache.olingo.odata2.api.servicedocument.ServiceDocument`
OData feed	<entity-set>	`org.apache.olingo.odata2.api.ep.feed.ODataFeed`
OData entry	<entity-set>(<key-predicate>)	`org.apache.olingo.odata2.api.ep.entry.ODataEntry` for Out body (response) `java.util.Map<String, Object>` for In body (request)
Simple property	<entity-set>(<key-predicate>)/<simple-property>	The appropriate Java data type as described by Olingo EdmProperty
Simple property value	<entity-set>(<key-predicate>)/<simple-property>/$value	The appropriate Java data type as described by Olingo EdmProperty
Complex property	<entity-set>(<key-predicate>)/<complex-property>	java.util.Map<String, Object>
Zero or one association link	<entity-set>(<key-predicate>/$link/<one-to-one-entity-set-property>	String for response `java.util.Map<String, Object>` with key property names and values for request
Zero or many association links	<entity-set>(<key-predicate>/$link/<one-to-many-entity-set-property>	`java.util.List<String>` for response `java.util.List<java.util.Map<String, Object>>` containing a list of key property names and values for request
Count	<resource-uri>/$count	java.lang.Long

Entity data model

$metadata

org.apache.olingo.odata2.api.edm.Edm

Service document

/

org.apache.olingo.odata2.api.servicedocument.ServiceDocument

OData feed

<entity-set>

org.apache.olingo.odata2.api.ep.feed.ODataFeed

OData entry

<entity-set>(<key-predicate>)

org.apache.olingo.odata2.api.ep.entry.ODataEntry for Out body (response) java.util.Map<String, Object> for In body (request)

Simple property

<entity-set>(<key-predicate>)/<simple-property>

The appropriate Java data type as described by Olingo EdmProperty

Simple property value

<entity-set>(<key-predicate>)/<simple-property>/$value

The appropriate Java data type as described by Olingo EdmProperty

Complex property

<entity-set>(<key-predicate>)/<complex-property>

java.util.Map<String, Object>

Zero or one association link

<entity-set>(<key-predicate>/$link/<one-to-one-entity-set-property>

String for response java.util.Map<String, Object> with key property names and values for request

Zero or many association links

<entity-set>(<key-predicate>/$link/<one-to-many-entity-set-property>

java.util.List<String> for response java.util.List<java.util.Map<String, Object>> containing a list of key property names and values for request

Count

<resource-uri>/$count

java.lang.Long

Samples

The following route reads top 5 entries from the Manufacturer feed ordered by ascending Name property.

from("direct:...")
    .setHeader("CamelOlingo2.$top", "5");
    .to("olingo2://read/Manufacturers?orderBy=Name%20asc");

The following route reads Manufacturer entry using the key property value in incoming id header.

from("direct:...")
    .setHeader("CamelOlingo2.keyPredicate", header("id"))
    .to("olingo2://read/Manufacturers");

The following route creates Manufacturer entry using the java.util.Map<String, Object> in the body message.

from("direct:...")
    .to("olingo2://create/Manufacturers");

The following route polls Manufacturer delta feed every 30 seconds. The bean blah updates the bean paramsBean to add an updated !deltatoken property with the value returned in the ODataDeltaFeed result. Since the initial delta token is not known, the consumer endpoint will produce an ODataFeed value the first time, and ODataDeltaFeed on subsequent polls.

from("olingo2://read/Manufacturers?queryParams=#paramsBean&timeUnit=SECONDS&delay=30")
    .to("bean:blah");

Spring Boot Auto-Configuration

When using olingo2 with Spring Boot make sure to use the following Maven dependency to have support for auto configuration:

<dependency>
  <groupId>org.apache.camel.springboot</groupId>
  <artifactId>camel-olingo2-starter</artifactId>
  <version>x.x.x</version>
  <!-- use the same version as your Camel core version -->
</dependency>

The component supports 19 options, which are listed below.

Name	Description	Default	Type
camel.component.olingo2.autowired-enabled	Whether autowiring is enabled. This is used for automatic autowiring options (the option must be marked as autowired) by looking up in the registry to find if there is a single instance of matching type, which then gets configured on the component. This can be used for automatic configuring JDBC data sources, JMS connection factories, AWS Clients, etc.	true	Boolean
camel.component.olingo2.bridge-error-handler	Allows for bridging the consumer to the Camel routing Error Handler, which mean any exceptions (if possible) occurred while the Camel consumer is trying to pickup incoming messages, or the likes, will now be processed as a message and handled by the routing Error Handler. Important: This is only possible if the 3rd party component allows Camel to be alerted if an exception was thrown. Some components handle this internally only, and therefore bridgeErrorHandler is not possible. In other situations we may improve the Camel component to hook into the 3rd party component and make this possible for future releases. By default the consumer will use the org.apache.camel.spi.ExceptionHandler to deal with exceptions, that will be logged at WARN or ERROR level and ignored.	false	Boolean
camel.component.olingo2.configuration	To use the shared configuration. The option is a org.apache.camel.component.olingo2.Olingo2Configuration type.		Olingo2Configuration
camel.component.olingo2.connect-timeout	HTTP connection creation timeout in milliseconds, defaults to 30,000 (30 seconds).	30000	Integer
camel.component.olingo2.content-type	Content-Type header value can be used to specify JSON or XML message format, defaults to application/json;charset=utf-8.	application/json;charset=utf-8	String
camel.component.olingo2.enabled	Whether to enable auto configuration of the olingo2 component. This is enabled by default.		Boolean
camel.component.olingo2.entity-provider-read-properties	Custom entity provider read properties applied to all read operations. The option is a org.apache.olingo.odata2.api.ep.EntityProviderReadProperties type.		EntityProviderReadProperties
camel.component.olingo2.entity-provider-write-properties	Custom entity provider write properties applied to create, update, patch, batch and merge operations. For instance users can skip the Json object wrapper or enable content only mode when sending request data. A service URI set in the properties will always be overwritten by the serviceUri configuration parameter. Please consider to using the serviceUri configuration parameter instead of setting the respective write property here. The option is a org.apache.olingo.odata2.api.ep.EntityProviderWriteProperties type.		EntityProviderWriteProperties
camel.component.olingo2.filter-already-seen	Set this to true to filter out results that have already been communicated by this component.	false	Boolean
camel.component.olingo2.http-async-client-builder	Custom HTTP async client builder for more complex HTTP client configuration, overrides connectionTimeout, socketTimeout, proxy and sslContext. Note that a socketTimeout MUST be specified in the builder, otherwise OData requests could block indefinitely. The option is a org.apache.http.impl.nio.client.HttpAsyncClientBuilder type.		HttpAsyncClientBuilder
camel.component.olingo2.http-client-builder	Custom HTTP client builder for more complex HTTP client configuration, overrides connectionTimeout, socketTimeout, proxy and sslContext. Note that a socketTimeout MUST be specified in the builder, otherwise OData requests could block indefinitely. The option is a org.apache.http.impl.client.HttpClientBuilder type.		HttpClientBuilder
camel.component.olingo2.http-headers	Custom HTTP headers to inject into every request, this could include OAuth tokens, etc.		Map
camel.component.olingo2.lazy-start-producer	Whether the producer should be started lazy (on the first message). By starting lazy you can use this to allow CamelContext and routes to startup in situations where a producer may otherwise fail during starting and cause the route to fail being started. By deferring this startup to be lazy then the startup failure can be handled during routing messages via Camel’s routing error handlers. Beware that when the first message is processed then creating and starting the producer may take a little time and prolong the total processing time of the processing.	false	Boolean
camel.component.olingo2.proxy	HTTP proxy server configuration. The option is a org.apache.http.HttpHost type.		HttpHost
camel.component.olingo2.service-uri	Target OData service base URI, e.g. http://services.odata.org/OData/OData.svc.		String
camel.component.olingo2.socket-timeout	HTTP request timeout in milliseconds, defaults to 30,000 (30 seconds).	30000	Integer
camel.component.olingo2.split-result	For endpoints that return an array or collection, a consumer endpoint will map every element to distinct messages, unless splitResult is set to false.	true	Boolean
camel.component.olingo2.ssl-context-parameters	To configure security using SSLContextParameters. The option is a org.apache.camel.support.jsse.SSLContextParameters type.		SSLContextParameters
camel.component.olingo2.use-global-ssl-context-parameters	Enable usage of global SSL context parameters.	false	Boolean

Name

Description

Default

Type

camel.component.olingo2.autowired-enabled

Whether autowiring is enabled. This is used for automatic autowiring options (the option must be marked as autowired) by looking up in the registry to find if there is a single instance of matching type, which then gets configured on the component. This can be used for automatic configuring JDBC data sources, JMS connection factories, AWS Clients, etc.

true

Boolean

camel.component.olingo2.bridge-error-handler

Allows for bridging the consumer to the Camel routing Error Handler, which mean any exceptions (if possible) occurred while the Camel consumer is trying to pickup incoming messages, or the likes, will now be processed as a message and handled by the routing Error Handler. Important: This is only possible if the 3rd party component allows Camel to be alerted if an exception was thrown. Some components handle this internally only, and therefore bridgeErrorHandler is not possible. In other situations we may improve the Camel component to hook into the 3rd party component and make this possible for future releases. By default the consumer will use the org.apache.camel.spi.ExceptionHandler to deal with exceptions, that will be logged at WARN or ERROR level and ignored.

false

Boolean

camel.component.olingo2.configuration

To use the shared configuration. The option is a org.apache.camel.component.olingo2.Olingo2Configuration type.

Olingo2Configuration

camel.component.olingo2.connect-timeout

HTTP connection creation timeout in milliseconds, defaults to 30,000 (30 seconds).

30000

Integer

camel.component.olingo2.content-type

Content-Type header value can be used to specify JSON or XML message format, defaults to application/json;charset=utf-8.

application/json;charset=utf-8

String

camel.component.olingo2.enabled

Whether to enable auto configuration of the olingo2 component. This is enabled by default.

Boolean

camel.component.olingo2.entity-provider-read-properties

Custom entity provider read properties applied to all read operations. The option is a org.apache.olingo.odata2.api.ep.EntityProviderReadProperties type.

EntityProviderReadProperties

camel.component.olingo2.entity-provider-write-properties

Custom entity provider write properties applied to create, update, patch, batch and merge operations. For instance users can skip the Json object wrapper or enable content only mode when sending request data. A service URI set in the properties will always be overwritten by the serviceUri configuration parameter. Please consider to using the serviceUri configuration parameter instead of setting the respective write property here. The option is a org.apache.olingo.odata2.api.ep.EntityProviderWriteProperties type.

EntityProviderWriteProperties

camel.component.olingo2.filter-already-seen

Set this to true to filter out results that have already been communicated by this component.

false

Boolean

camel.component.olingo2.http-async-client-builder

Custom HTTP async client builder for more complex HTTP client configuration, overrides connectionTimeout, socketTimeout, proxy and sslContext. Note that a socketTimeout MUST be specified in the builder, otherwise OData requests could block indefinitely. The option is a org.apache.http.impl.nio.client.HttpAsyncClientBuilder type.

HttpAsyncClientBuilder

camel.component.olingo2.http-client-builder

Custom HTTP client builder for more complex HTTP client configuration, overrides connectionTimeout, socketTimeout, proxy and sslContext. Note that a socketTimeout MUST be specified in the builder, otherwise OData requests could block indefinitely. The option is a org.apache.http.impl.client.HttpClientBuilder type.

HttpClientBuilder

camel.component.olingo2.http-headers

Custom HTTP headers to inject into every request, this could include OAuth tokens, etc.

Map

camel.component.olingo2.lazy-start-producer

Whether the producer should be started lazy (on the first message). By starting lazy you can use this to allow CamelContext and routes to startup in situations where a producer may otherwise fail during starting and cause the route to fail being started. By deferring this startup to be lazy then the startup failure can be handled during routing messages via Camel’s routing error handlers. Beware that when the first message is processed then creating and starting the producer may take a little time and prolong the total processing time of the processing.

false

Boolean

camel.component.olingo2.proxy

HTTP proxy server configuration. The option is a org.apache.http.HttpHost type.

HttpHost

camel.component.olingo2.service-uri

Target OData service base URI, e.g. http://services.odata.org/OData/OData.svc.

String

camel.component.olingo2.socket-timeout

HTTP request timeout in milliseconds, defaults to 30,000 (30 seconds).

30000

Integer

camel.component.olingo2.split-result

For endpoints that return an array or collection, a consumer endpoint will map every element to distinct messages, unless splitResult is set to false.

true

Boolean

camel.component.olingo2.ssl-context-parameters

To configure security using SSLContextParameters. The option is a org.apache.camel.support.jsse.SSLContextParameters type.

SSLContextParameters

camel.component.olingo2.use-global-ssl-context-parameters

Enable usage of global SSL context parameters.

false

Boolean