Multicast

The Multicast EIP allows routing the same message to a number of endpoints and process them in a different way.

image

The Multicast EIP has many features and is also used as a baseline for the Recipient List and Split EIPs. For example, the Multicast EIP is capable of aggregating each multicasted message into a single response message as the result after the Multicast EIP.

Options

The Multicast eip supports 13 options, which are listed below.

Name Description Default Type

description

Sets the description of this node.

String

disabled

Whether to disable this EIP from the route during build time. Once an EIP has been disabled then it cannot be enabled later at runtime.

false

Boolean

aggregationStrategy

Refers to an AggregationStrategy to be used to assemble the replies from the multicasts, into a single outgoing message from the Multicast. By default Camel will use the last reply as the outgoing message. You can also use a POJO as the AggregationStrategy.

AggregationStrategy

aggregationStrategyMethodName

This option can be used to explicit declare the method name to use, when using POJOs as the AggregationStrategy.

String

aggregationStrategyMethodAllowNull

If this option is false then the aggregate method is not used if there was no data to enrich. If this option is true then null values is used as the oldExchange (when no data to enrich), when using POJOs as the AggregationStrategy.

false

Boolean

parallelAggregate

If enabled then the aggregate method on AggregationStrategy can be called concurrently. Notice that this would require the implementation of AggregationStrategy to be implemented as thread-safe. By default this is false meaning that Camel synchronizes the call to the aggregate method. Though in some use-cases this can be used to archive higher performance when the AggregationStrategy is implemented as thread-safe.

false

Boolean

parallelProcessing

If enabled then sending messages to the multicasts occurs concurrently. Note the caller thread will still wait until all messages has been fully processed, before it continues. Its only the sending and processing the replies from the multicasts which happens concurrently. When parallel processing is enabled, then the Camel routing engin will continue processing using last used thread from the parallel thread pool. However, if you want to use the original thread that called the multicast, then make sure to enable the synchronous option as well.

false

Boolean

synchronous

Sets whether synchronous processing should be strictly used. When enabled then the same thread is used to continue routing after the multicast is complete, even if parallel processing is enabled.

false

Boolean

streaming

If enabled then Camel will process replies out-of-order, eg in the order they come back. If disabled, Camel will process replies in the same order as defined by the multicast.

false

Boolean

stopOnException

Will now stop further processing if an exception or failure occurred during processing of an org.apache.camel.Exchange and the caused exception will be thrown. Will also stop if processing the exchange failed (has a fault message) or an exception was thrown and handled by the error handler (such as using onException). In all situations the multicast will stop further processing. This is the same behavior as in pipeline, which is used by the routing engine. The default behavior is to not stop but continue processing till the end.

false

Boolean

timeout

Sets a total timeout specified in millis, when using parallel processing. If the Multicast hasn’t been able to send and process all replies within the given timeframe, then the timeout triggers and the Multicast breaks out and continues. Notice if you provide a TimeoutAwareAggregationStrategy then the timeout method is invoked before breaking out. If the timeout is reached with running tasks still remaining, certain tasks for which it is difficult for Camel to shut down in a graceful manner may continue to run. So use this option with a bit of care.

0

String

executorService

Refers to a custom Thread Pool to be used for parallel processing. Notice if you set this option, then parallel processing is automatic implied, and you do not have to enable that option as well.

ExecutorService

onPrepare

Uses the Processor when preparing the org.apache.camel.Exchange to be send. This can be used to deep-clone messages that should be send, or any custom logic needed before the exchange is send.

Processor

shareUnitOfWork

Shares the org.apache.camel.spi.UnitOfWork with the parent and each of the sub messages. Multicast will by default not share unit of work between the parent exchange and each multicasted exchange. This means each sub exchange has its own individual unit of work.

false

Boolean

outputs

Required

List

Exchange properties

The following exchange properties are set on each Exchange that are multicasted:

Property Type Description

CamelMulticastIndex

int

An index counter that increases for each Exchange being multicasted. The counter starts from 0.

CamelMulticastComplete

boolean

Whether this Exchange is the last.

Using Multicast

The following example shows how to take a request from the direct:a endpoint, then multicast these requests to direct:x, direct:y, and direct:z.

  • Java

  • XML

from("direct:a")
  .multicast()
    .to("direct:x")
    .to("direct:y")
    .to("direct:z");
<route>
    <from uri="direct:a"/>
    <multicast>
        <to uri="direct:b"/>
        <to uri="direct:c"/>
        <to uri="direct:d"/>
    </multicast>
</route>

By default, Multicast EIP runs in single threaded mode, which means that the next multicasted message is processed only when the previous is finished. This means that direct:b must be done before Camel will call direct:c and so on.

Multicasting with parallel processing

You can enable parallel processing with Multicast EIP so each multicasted message is processed by its own thread in parallel.

The example below enabled parallel mode:

  • Java

  • XML

from("direct:a")
  .multicast().parallelProcessing()
    .to("direct:x")
    .to("direct:y")
    .to("direct:z");
<route>
    <from uri="direct:a"/>
    <multicast parallelProcessing="true">
        <to uri="direct:b"/>
        <to uri="direct:c"/>
        <to uri="direct:d"/>
    </multicast>
</route>

When parallel processing is enabled, then the Camel routing engin will continue processing using last used thread from the parallel thread pool. However, if you want to use the original thread that called the multicast, then make sure to enable the synchronous option as well.

Ending a Multicast block

You may want to continue routing the exchange after the Multicast EIP.

In the example below, then sending to mock:result happens after the Multicast EIP has finished. In other words, direct:x, direct:y, and direct:z should be completed first, before the message continues.

  • Java

  • XML

from("direct:a")
  .multicast().parallelProcessing()
    .to("direct:x")
    .to("direct:y")
    .to("direct:z")
  .end()
  .to("mock:result");

Note that you need to use end() to mark where multicast ends, and where other EIPs can be added to continue the route.

<route>
    <from uri="direct:a"/>
    <multicast parallelProcessing="true">
        <to uri="direct:b"/>
        <to uri="direct:c"/>
        <to uri="direct:d"/>
    </multicast>
    <to uri="mock:result"/>
</route>

Aggregating

The AggregationStrategy is used for aggregating all the multicasted exchanges together as a single response exchange, that becomes the outgoing exchange after the Multicast EIP block.

The example now aggregates with the MyAggregationStrategy class:

  • Java

  • XML

from("direct:start")
  .multicast(new MyAggregationStrategy()).parallelProcessing().timeout(500)
    .to("direct:x")
    .to("direct:y")
    .to("direct:z")
  .end()
  .to("mock:result");

We can refer to the FQN class name with #class: syntax as shown below:

<route>
    <from uri="direct:a"/>
    <multicast parallelProcessing="true" timeout="5000"
               aggreationStrategy="#class:com.foo.MyAggregationStrategy">
        <to uri="direct:b"/>
        <to uri="direct:c"/>
        <to uri="direct:d"/>
    </multicast>
    <to uri="mock:result"/>
</route>

The Multicast, Recipient List, and Splitter EIPs have special support for using AggregationStrategy with access to the original input exchange. You may want to use this when you aggregate messages and there has been a failure in one of the messages, which you then want to enrich on the original input message and return as response; it’s the aggregate method with three exchange parameters.

Stop processing in case of exception

The Multicast EIP will by default continue to process the entire exchange even in case one of the multicasted messages will throw an exception during routing.

For example, if you want to multicast to three destinations and the second destination fails by an exception. What Camel does by default is to process the remainder destinations. You have the chance to deal with the exception when aggregating using an AggregationStrategy.

But sometimes you want Camel to stop and let the exception be propagated back, and let the Camel Error Handler handle it. You can do this by specifying that it should stop in case of an exception occurred. This is done by the stopOnException option as shown below:

  • Java

  • XML

from("direct:start")
    .multicast()
        .stopOnException().to("direct:foo", "direct:bar", "direct:baz")
    .end()
    .to("mock:result");

    from("direct:foo").to("mock:foo");

    from("direct:bar").process(new MyProcessor()).to("mock:bar");

    from("direct:baz").to("mock:baz");
<routes>
    <route>
        <from uri="direct:start"/>
        <multicast stopOnException="true">
            <to uri="direct:foo"/>
            <to uri="direct:bar"/>
            <to uri="direct:baz"/>
        </multicast>
        <to uri="mock:result"/>
    </route>

    <route>
        <from uri="direct:foo"/>
        <to uri="mock:foo"/>
    </route>

    <route>
        <from uri="direct:bar"/>
        <process ref="myProcessor"/>
        <to uri="mock:bar"/>
    </route>

    <route>
        <from uri="direct:baz"/>
        <to uri="mock:baz"/>
    </route>
</routes>

In the example above, then MyProcessor is causing a failure and throws an exception. This means the Multicast EIP will stop after this, and not the last route (direct:baz).

Preparing the message by deep copying before multicasting

The multicast EIP will copy the source exchange and multicast each copy. However, the copy is a shallow copy, so in case you have mutable message bodies, then any changes will be visible by the other copied messages. If you want to use a deep clone copy, then you need to use a custom onPrepare which allows you to create a deep copy of the message body in the Processor.

Notice the onPrepare can be used for any kind of custom logic that you would like to execute before the Exchange is being multicasted.

See Also

Because Multicast EIP is a baseline for the Recipient List and Split EIPs, then you can find more information in those EIPs about features that are also available with Multicast EIP.

Back to top