AWS MQ

URI Format

aws2-mq://label[?options]

You can append query options to the URI in the following format, ?options=value&option2=value&…

Configuring Options

Camel components are configured on two separate levels:

component level
endpoint level

Configuring Component Options

The component level is the highest level which holds general and common configurations that are inherited by the endpoints. For example a component may have security settings, credentials for authentication, urls for network connection and so forth.

Some components only have a few options, and others may have many. Because components typically have pre configured defaults that are commonly used, then you may often only need to configure a few options on a component; or none at all.

Configuring components can be done with the Component DSL, in a configuration file (application.properties|yaml), or directly with Java code.

Configuring Endpoint Options

Where you find yourself configuring the most is on endpoints, as endpoints often have many options, which allows you to configure what you need the endpoint to do. The options are also categorized into whether the endpoint is used as consumer (from) or as a producer (to), or used for both.

Configuring endpoints is most often done directly in the endpoint URI as path and query parameters. You can also use the Endpoint DSL and DataFormat DSL as a type safe way of configuring endpoints and data formats in Java.

A good practice when configuring options is to use Property Placeholders, which allows to not hardcode urls, port numbers, sensitive information, and other settings. In other words placeholders allows to externalize the configuration from your code, and gives more flexibility and reuse.

The following two sections lists all the options, firstly for the component followed by the endpoint.

Component Options

The AWS MQ component supports 20 options, which are listed below.

Name	Description	Default	Type
configuration (producer)	Component configuration.		MQ2Configuration
lazyStartProducer (producer)	Whether the producer should be started lazy (on the first message). By starting lazy you can use this to allow CamelContext and routes to startup in situations where a producer may otherwise fail during starting and cause the route to fail being started. By deferring this startup to be lazy then the startup failure can be handled during routing messages via Camel’s routing error handlers. Beware that when the first message is processed then creating and starting the producer may take a little time and prolong the total processing time of the processing.	false	boolean
operation (producer)	Required The operation to perform. It can be listBrokers,createBroker,deleteBroker. Enum values: listBrokers createBroker deleteBroker rebootBroker updateBroker describeBroker		MQ2Operations
overrideEndpoint (producer)	Set the need for overidding the endpoint. This option needs to be used in combination with uriEndpointOverride option.	false	boolean
pojoRequest (producer)	If we want to use a POJO request as body or not.	false	boolean
region (producer)	The region in which MQ client needs to work. When using this parameter, the configuration will expect the lowercase name of the region (for example ap-east-1) You’ll need to use the name Region.EU_WEST_1.id().		String
uriEndpointOverride (producer)	Set the overriding uri endpoint. This option needs to be used in combination with overrideEndpoint option.		String
amazonMqClient (advanced)	Autowired To use a existing configured AmazonMQClient as client.		MqClient
autowiredEnabled (advanced)	Whether autowiring is enabled. This is used for automatic autowiring options (the option must be marked as autowired) by looking up in the registry to find if there is a single instance of matching type, which then gets configured on the component. This can be used for automatic configuring JDBC data sources, JMS connection factories, AWS Clients, etc.	true	boolean
healthCheckConsumerEnabled (health)	Used for enabling or disabling all consumer based health checks from this component.	true	boolean
healthCheckProducerEnabled (health)	Used for enabling or disabling all producer based health checks from this component. Notice: Camel has by default disabled all producer based health-checks. You can turn on producer checks globally by setting camel.health.producersEnabled=true.	true	boolean
proxyHost (proxy)	To define a proxy host when instantiating the MQ client.		String
proxyPort (proxy)	To define a proxy port when instantiating the MQ client.		Integer
proxyProtocol (proxy)	To define a proxy protocol when instantiating the MQ client. Enum values: HTTP HTTPS	HTTPS	Protocol
accessKey (security)	Amazon AWS Access Key.		String
profileCredentialsName (security)	If using a profile credentials provider this parameter will set the profile name.		String
secretKey (security)	Amazon AWS Secret Key.		String
trustAllCertificates (security)	If we want to trust all certificates in case of overriding the endpoint.	false	boolean
useDefaultCredentialsProvider (security)	Set whether the MQ client should expect to load credentials through a default credentials provider or to expect static credentials to be passed in.	false	boolean
useProfileCredentialsProvider (security)	Set whether the MQ client should expect to load credentials through a profile credentials provider.	false	boolean

Name

Description

Default

Type

configuration (producer)

Component configuration.

MQ2Configuration

lazyStartProducer (producer)

Whether the producer should be started lazy (on the first message). By starting lazy you can use this to allow CamelContext and routes to startup in situations where a producer may otherwise fail during starting and cause the route to fail being started. By deferring this startup to be lazy then the startup failure can be handled during routing messages via Camel’s routing error handlers. Beware that when the first message is processed then creating and starting the producer may take a little time and prolong the total processing time of the processing.

false

boolean

operation (producer)

Required The operation to perform. It can be listBrokers,createBroker,deleteBroker.

Enum values:

listBrokers
createBroker
deleteBroker
rebootBroker
updateBroker
describeBroker

MQ2Operations

overrideEndpoint (producer)

Set the need for overidding the endpoint. This option needs to be used in combination with uriEndpointOverride option.

false

boolean

pojoRequest (producer)

If we want to use a POJO request as body or not.

false

boolean

region (producer)

The region in which MQ client needs to work. When using this parameter, the configuration will expect the lowercase name of the region (for example ap-east-1) You’ll need to use the name Region.EU_WEST_1.id().

String

uriEndpointOverride (producer)

Set the overriding uri endpoint. This option needs to be used in combination with overrideEndpoint option.

String

amazonMqClient (advanced)

Autowired To use a existing configured AmazonMQClient as client.

MqClient

autowiredEnabled (advanced)

Whether autowiring is enabled. This is used for automatic autowiring options (the option must be marked as autowired) by looking up in the registry to find if there is a single instance of matching type, which then gets configured on the component. This can be used for automatic configuring JDBC data sources, JMS connection factories, AWS Clients, etc.

true

boolean

healthCheckConsumerEnabled (health)

Used for enabling or disabling all consumer based health checks from this component.

true

boolean

healthCheckProducerEnabled (health)

Used for enabling or disabling all producer based health checks from this component. Notice: Camel has by default disabled all producer based health-checks. You can turn on producer checks globally by setting camel.health.producersEnabled=true.

true

boolean

proxyHost (proxy)

To define a proxy host when instantiating the MQ client.

String

proxyPort (proxy)

To define a proxy port when instantiating the MQ client.

Integer

proxyProtocol (proxy)

To define a proxy protocol when instantiating the MQ client.

Enum values:

HTTP
HTTPS

HTTPS

Protocol

accessKey (security)

Amazon AWS Access Key.

String

profileCredentialsName (security)

If using a profile credentials provider this parameter will set the profile name.

String

secretKey (security)

Amazon AWS Secret Key.

String

trustAllCertificates (security)

If we want to trust all certificates in case of overriding the endpoint.

false

boolean

useDefaultCredentialsProvider (security)

Set whether the MQ client should expect to load credentials through a default credentials provider or to expect static credentials to be passed in.

false

boolean

useProfileCredentialsProvider (security)

Set whether the MQ client should expect to load credentials through a profile credentials provider.

false

boolean

Endpoint Options

The AWS MQ endpoint is configured using URI syntax:

aws2-mq:label

with the following path and query parameters:

Path Parameters (1 parameters)

Name	Description	Default	Type
label (producer)	Required Logical name.		String

Name

Description

Default

Type

label (producer)

Required Logical name.

String

Query Parameters (16 parameters)

Name	Description	Default	Type
operation (producer)	Required The operation to perform. It can be listBrokers,createBroker,deleteBroker. Enum values: listBrokers createBroker deleteBroker rebootBroker updateBroker describeBroker		MQ2Operations
overrideEndpoint (producer)	Set the need for overidding the endpoint. This option needs to be used in combination with uriEndpointOverride option.	false	boolean
pojoRequest (producer)	If we want to use a POJO request as body or not.	false	boolean
region (producer)	The region in which MQ client needs to work. When using this parameter, the configuration will expect the lowercase name of the region (for example ap-east-1) You’ll need to use the name Region.EU_WEST_1.id().		String
uriEndpointOverride (producer)	Set the overriding uri endpoint. This option needs to be used in combination with overrideEndpoint option.		String
lazyStartProducer (producer (advanced))	Whether the producer should be started lazy (on the first message). By starting lazy you can use this to allow CamelContext and routes to startup in situations where a producer may otherwise fail during starting and cause the route to fail being started. By deferring this startup to be lazy then the startup failure can be handled during routing messages via Camel’s routing error handlers. Beware that when the first message is processed then creating and starting the producer may take a little time and prolong the total processing time of the processing.	false	boolean
amazonMqClient (advanced)	Autowired To use a existing configured AmazonMQClient as client.		MqClient
proxyHost (proxy)	To define a proxy host when instantiating the MQ client.		String
proxyPort (proxy)	To define a proxy port when instantiating the MQ client.		Integer
proxyProtocol (proxy)	To define a proxy protocol when instantiating the MQ client. Enum values: HTTP HTTPS	HTTPS	Protocol
accessKey (security)	Amazon AWS Access Key.		String
profileCredentialsName (security)	If using a profile credentials provider this parameter will set the profile name.		String
secretKey (security)	Amazon AWS Secret Key.		String
trustAllCertificates (security)	If we want to trust all certificates in case of overriding the endpoint.	false	boolean
useDefaultCredentialsProvider (security)	Set whether the MQ client should expect to load credentials through a default credentials provider or to expect static credentials to be passed in.	false	boolean
useProfileCredentialsProvider (security)	Set whether the MQ client should expect to load credentials through a profile credentials provider.	false	boolean

Name

Description

Default

Type

operation (producer)

Required The operation to perform. It can be listBrokers,createBroker,deleteBroker.

Enum values:

listBrokers
createBroker
deleteBroker
rebootBroker
updateBroker
describeBroker

MQ2Operations

overrideEndpoint (producer)

Set the need for overidding the endpoint. This option needs to be used in combination with uriEndpointOverride option.

false

boolean

pojoRequest (producer)

If we want to use a POJO request as body or not.

false

boolean

region (producer)

The region in which MQ client needs to work. When using this parameter, the configuration will expect the lowercase name of the region (for example ap-east-1) You’ll need to use the name Region.EU_WEST_1.id().

String

uriEndpointOverride (producer)

Set the overriding uri endpoint. This option needs to be used in combination with overrideEndpoint option.

String

lazyStartProducer (producer (advanced))

Whether the producer should be started lazy (on the first message). By starting lazy you can use this to allow CamelContext and routes to startup in situations where a producer may otherwise fail during starting and cause the route to fail being started. By deferring this startup to be lazy then the startup failure can be handled during routing messages via Camel’s routing error handlers. Beware that when the first message is processed then creating and starting the producer may take a little time and prolong the total processing time of the processing.

false

boolean

amazonMqClient (advanced)

Autowired To use a existing configured AmazonMQClient as client.

MqClient

proxyHost (proxy)

To define a proxy host when instantiating the MQ client.

String

proxyPort (proxy)

To define a proxy port when instantiating the MQ client.

Integer

proxyProtocol (proxy)

To define a proxy protocol when instantiating the MQ client.

Enum values:

HTTP
HTTPS

HTTPS

Protocol

accessKey (security)

Amazon AWS Access Key.

String

profileCredentialsName (security)

If using a profile credentials provider this parameter will set the profile name.

String

secretKey (security)

Amazon AWS Secret Key.

String

trustAllCertificates (security)

If we want to trust all certificates in case of overriding the endpoint.

false

boolean

useDefaultCredentialsProvider (security)

Set whether the MQ client should expect to load credentials through a default credentials provider or to expect static credentials to be passed in.

false

boolean

useProfileCredentialsProvider (security)

Set whether the MQ client should expect to load credentials through a profile credentials provider.

false

boolean

Required MQ component options

You have to provide the amazonMqClient in the Registry or your accessKey and secretKey to access the Amazon MQ service.

Usage

Static credentials, Default Credential Provider and Profile Credentials Provider

You have the possibility of avoiding the usage of explicit static credentials, by specifying the useDefaultCredentialsProvider option and set it to true.

The order of evaluation for Default Credentials Provider is the following:

Java system properties - aws.accessKeyId and aws.secretKey
Environment variables - AWS_ACCESS_KEY_ID and AWS_SECRET_ACCESS_KEY.
Web Identity Token from AWS STS.
The shared credentials and config files.
Amazon ECS container credentials - loaded from the Amazon ECS if the environment variable AWS_CONTAINER_CREDENTIALS_RELATIVE_URI is set.
Amazon EC2 Instance profile credentials.

You have also the possibility of using Profile Credentials Provider, by specifying the useProfileCredentialsProvider option to true and profileCredentialsName to the profile name.

Only one of static, default and profile credentials could be used at the same time.

For more information about this you can look at AWS credentials documentation

Message Headers

The AWS MQ component supports 11 message header(s), which is/are listed below:

Name Description Default Type

Name	Description	Default	Type
CamelAwsMQOperation (producer) Constant: `OPERATION`	The operation we want to perform.		String
CamelAwsMQMaxResults (producer) Constant: `MAX_RESULTS`	The number of results that must be retrieved from listBrokers operation.		Integer
CamelAwsMQBrokerName (producer) Constant: `BROKER_NAME`	The broker name.		String
CamelAwsMQBrokerEngine (producer) Constant: `BROKER_ENGINE`	The Broker Engine for MQ.		String
CamelAwsMQBrokerEngineVersion (producer) Constant: `BROKER_ENGINE_VERSION`	The Broker Engine Version for MQ. Currently you can choose between 5.15.6 and 5.15.0 of ACTIVEMQ.		String
CamelAwsMQBrokerID (producer) Constant: `BROKER_ID`	The broker id.		String
CamelAwsMQConfigurationID (producer) Constant: `CONFIGURATION_ID`	A list of information about the configuration.		ConfigurationId
CamelAwsMQBrokerDeploymentMode (producer) Constant: `BROKER_DEPLOYMENT_MODE`	The deployment mode for the broker in the createBroker operation.		String
CamelAwsMQBrokerInstanceType (producer) Constant: `BROKER_INSTANCE_TYPE`	The instance type for the MQ machine in the createBroker operation.		String
CamelAwsMQBrokerUsers (producer) Constant: `BROKER_USERS`	The list of users for MQ.		List
CamelAwsMQBrokerPubliclyAccessible (producer) Constant: `BROKER_PUBLICLY_ACCESSIBLE`	If the MQ instance must be publicly available or not.	false	Boolean

CamelAwsMQOperation (producer)

Constant: OPERATION

The operation we want to perform.

String

CamelAwsMQMaxResults (producer)

Constant: MAX_RESULTS

The number of results that must be retrieved from listBrokers operation.

Integer

CamelAwsMQBrokerName (producer)

Constant: BROKER_NAME

The broker name.

String

CamelAwsMQBrokerEngine (producer)

Constant: BROKER_ENGINE

The Broker Engine for MQ.

String

CamelAwsMQBrokerEngineVersion (producer)

Constant: BROKER_ENGINE_VERSION

The Broker Engine Version for MQ. Currently you can choose between 5.15.6 and 5.15.0 of ACTIVEMQ.

String

CamelAwsMQBrokerID (producer)

Constant: BROKER_ID

The broker id.

String

CamelAwsMQConfigurationID (producer)

Constant: CONFIGURATION_ID

A list of information about the configuration.

ConfigurationId

CamelAwsMQBrokerDeploymentMode (producer)

Constant: BROKER_DEPLOYMENT_MODE

The deployment mode for the broker in the createBroker operation.

String

CamelAwsMQBrokerInstanceType (producer)

Constant: BROKER_INSTANCE_TYPE

The instance type for the MQ machine in the createBroker operation.

String

CamelAwsMQBrokerUsers (producer)

Constant: BROKER_USERS

The list of users for MQ.

List

CamelAwsMQBrokerPubliclyAccessible (producer)

Constant: BROKER_PUBLICLY_ACCESSIBLE

If the MQ instance must be publicly available or not.

false

Boolean

MQ Producer operations

Camel-AWS MQ component provides the following operation on the producer side:

listBrokers
createBroker
deleteBroker
rebootBroker
updateBroker
describeBroker

Examples

Producer Examples

listBrokers: this operation will list the available MQ Brokers in AWS

from("direct:listBrokers")
    .to("aws2-mq://test?amazonMqClient=#amazonMqClient&operation=listBrokers")

createBroker: this operation will create an MQ Broker in AWS

from("direct:createBroker")
    .process(new Processor() {
       @Override
       public void process(Exchange exchange) throws Exception {
                exchange.getIn().setHeader(MQ2Constants.BROKER_NAME, "test");
                exchange.getIn().setHeader(MQ2Constants.BROKER_DEPLOYMENT_MODE, DeploymentMode.SINGLE_INSTANCE);
                exchange.getIn().setHeader(MQ2Constants.BROKER_INSTANCE_TYPE, "mq.t2.micro");
                exchange.getIn().setHeader(MQ2Constants.BROKER_ENGINE, EngineType.ACTIVEMQ.name());
                exchange.getIn().setHeader(MQ2Constants.BROKER_ENGINE_VERSION, "5.15.6");
                exchange.getIn().setHeader(MQ2Constants.BROKER_PUBLICLY_ACCESSIBLE, false);
                List<User> users = new ArrayList<>();
                User.Builder user = User.builder();
                user.username("camel");
                user.password("camelpwd");
                users.add(user.build());
                exchange.getIn().setHeader(MQ2Constants.BROKER_USERS, users);

       }
    })
    .to("aws2-mq://test?amazonMqClient=#amazonMqClient&operation=createBroker")

deleteBroker: this operation will delete an MQ Broker in AWS

from("direct:listBrokers")
    .setHeader(MQ2Constants.BROKER_ID, constant("123")
    .to("aws2-mq://test?amazonMqClient=#amazonMqClient&operation=deleteBroker")

rebootBroker: this operation will delete an MQ Broker in AWS

from("direct:listBrokers")
    .setHeader(MQ2Constants.BROKER_ID, constant("123")
    .to("aws2-mq://test?amazonMqClient=#amazonMqClient&operation=rebootBroker")

Using a POJO as body

Sometimes build an AWS Request can be complex, because of multiple options. We introduce the possibility to use a POJO as body. In AWS MQ there are multiple operations you can submit, as an example for List brokers request, you can do something like:

from("direct:aws2-mq")
     .setBody(ListBrokersRequest.builder().maxResults(10).build())
     .to("aws2-mq://test?amazonMqClient=#amazonMqClient&operation=listBrokers&pojoRequest=true")

In this way you’ll pass the request directly without the need of passing headers and options specifically related to this operation.

Dependencies

Maven users will need to add the following dependency to their pom.xml.

pom.xml

<dependency>
    <groupId>org.apache.camel</groupId>
    <artifactId>camel-aws2-mq</artifactId>
    <version>${camel-version}</version>
</dependency>

where ${camel-version} must be replaced by the actual version of Camel.

Spring Boot Auto-Configuration

When using aws2-mq with Spring Boot make sure to use the following Maven dependency to have support for auto configuration:

<dependency>
  <groupId>org.apache.camel.springboot</groupId>
  <artifactId>camel-aws2-mq-starter</artifactId>
  <version>x.x.x</version>
  <!-- use the same version as your Camel core version -->
</dependency>

The component supports 21 options, which are listed below.

Name	Description	Default	Type
camel.component.aws2-mq.access-key	Amazon AWS Access Key.		String
camel.component.aws2-mq.amazon-mq-client	To use a existing configured AmazonMQClient as client. The option is a software.amazon.awssdk.services.mq.MqClient type.		MqClient
camel.component.aws2-mq.autowired-enabled	Whether autowiring is enabled. This is used for automatic autowiring options (the option must be marked as autowired) by looking up in the registry to find if there is a single instance of matching type, which then gets configured on the component. This can be used for automatic configuring JDBC data sources, JMS connection factories, AWS Clients, etc.	true	Boolean
camel.component.aws2-mq.configuration	Component configuration. The option is a org.apache.camel.component.aws2.mq.MQ2Configuration type.		MQ2Configuration
camel.component.aws2-mq.enabled	Whether to enable auto configuration of the aws2-mq component. This is enabled by default.		Boolean
camel.component.aws2-mq.health-check-consumer-enabled	Used for enabling or disabling all consumer based health checks from this component.	true	Boolean
camel.component.aws2-mq.health-check-producer-enabled	Used for enabling or disabling all producer based health checks from this component. Notice: Camel has by default disabled all producer based health-checks. You can turn on producer checks globally by setting camel.health.producersEnabled=true.	true	Boolean
camel.component.aws2-mq.lazy-start-producer	Whether the producer should be started lazy (on the first message). By starting lazy you can use this to allow CamelContext and routes to startup in situations where a producer may otherwise fail during starting and cause the route to fail being started. By deferring this startup to be lazy then the startup failure can be handled during routing messages via Camel’s routing error handlers. Beware that when the first message is processed then creating and starting the producer may take a little time and prolong the total processing time of the processing.	false	Boolean
camel.component.aws2-mq.operation	The operation to perform. It can be listBrokers,createBroker,deleteBroker.		MQ2Operations
camel.component.aws2-mq.override-endpoint	Set the need for overidding the endpoint. This option needs to be used in combination with uriEndpointOverride option.	false	Boolean
camel.component.aws2-mq.pojo-request	If we want to use a POJO request as body or not.	false	Boolean
camel.component.aws2-mq.profile-credentials-name	If using a profile credentials provider this parameter will set the profile name.		String
camel.component.aws2-mq.proxy-host	To define a proxy host when instantiating the MQ client.		String
camel.component.aws2-mq.proxy-port	To define a proxy port when instantiating the MQ client.		Integer
camel.component.aws2-mq.proxy-protocol	To define a proxy protocol when instantiating the MQ client.		Protocol
camel.component.aws2-mq.region	The region in which MQ client needs to work. When using this parameter, the configuration will expect the lowercase name of the region (for example ap-east-1) You’ll need to use the name Region.EU_WEST_1.id().		String
camel.component.aws2-mq.secret-key	Amazon AWS Secret Key.		String
camel.component.aws2-mq.trust-all-certificates	If we want to trust all certificates in case of overriding the endpoint.	false	Boolean
camel.component.aws2-mq.uri-endpoint-override	Set the overriding uri endpoint. This option needs to be used in combination with overrideEndpoint option.		String
camel.component.aws2-mq.use-default-credentials-provider	Set whether the MQ client should expect to load credentials through a default credentials provider or to expect static credentials to be passed in.	false	Boolean
camel.component.aws2-mq.use-profile-credentials-provider	Set whether the MQ client should expect to load credentials through a profile credentials provider.	false	Boolean

Name

Description

Default

Type

camel.component.aws2-mq.access-key

Amazon AWS Access Key.

String

camel.component.aws2-mq.amazon-mq-client

To use a existing configured AmazonMQClient as client. The option is a software.amazon.awssdk.services.mq.MqClient type.

MqClient

camel.component.aws2-mq.autowired-enabled

Whether autowiring is enabled. This is used for automatic autowiring options (the option must be marked as autowired) by looking up in the registry to find if there is a single instance of matching type, which then gets configured on the component. This can be used for automatic configuring JDBC data sources, JMS connection factories, AWS Clients, etc.

true

Boolean

camel.component.aws2-mq.configuration

Component configuration. The option is a org.apache.camel.component.aws2.mq.MQ2Configuration type.

MQ2Configuration

camel.component.aws2-mq.enabled

Whether to enable auto configuration of the aws2-mq component. This is enabled by default.

Boolean

camel.component.aws2-mq.health-check-consumer-enabled

Used for enabling or disabling all consumer based health checks from this component.

true

Boolean

camel.component.aws2-mq.health-check-producer-enabled

Used for enabling or disabling all producer based health checks from this component. Notice: Camel has by default disabled all producer based health-checks. You can turn on producer checks globally by setting camel.health.producersEnabled=true.

true

Boolean

camel.component.aws2-mq.lazy-start-producer

Whether the producer should be started lazy (on the first message). By starting lazy you can use this to allow CamelContext and routes to startup in situations where a producer may otherwise fail during starting and cause the route to fail being started. By deferring this startup to be lazy then the startup failure can be handled during routing messages via Camel’s routing error handlers. Beware that when the first message is processed then creating and starting the producer may take a little time and prolong the total processing time of the processing.

false

Boolean

camel.component.aws2-mq.operation

The operation to perform. It can be listBrokers,createBroker,deleteBroker.

MQ2Operations

camel.component.aws2-mq.override-endpoint

Set the need for overidding the endpoint. This option needs to be used in combination with uriEndpointOverride option.

false

Boolean

camel.component.aws2-mq.pojo-request

If we want to use a POJO request as body or not.

false

Boolean

camel.component.aws2-mq.profile-credentials-name

If using a profile credentials provider this parameter will set the profile name.

String

camel.component.aws2-mq.proxy-host

To define a proxy host when instantiating the MQ client.

String

camel.component.aws2-mq.proxy-port

To define a proxy port when instantiating the MQ client.

Integer

camel.component.aws2-mq.proxy-protocol

To define a proxy protocol when instantiating the MQ client.

Protocol

camel.component.aws2-mq.region

The region in which MQ client needs to work. When using this parameter, the configuration will expect the lowercase name of the region (for example ap-east-1) You’ll need to use the name Region.EU_WEST_1.id().

String

camel.component.aws2-mq.secret-key

Amazon AWS Secret Key.

String

camel.component.aws2-mq.trust-all-certificates

If we want to trust all certificates in case of overriding the endpoint.

false

Boolean

camel.component.aws2-mq.uri-endpoint-override

Set the overriding uri endpoint. This option needs to be used in combination with overrideEndpoint option.

String

camel.component.aws2-mq.use-default-credentials-provider

Set whether the MQ client should expect to load credentials through a default credentials provider or to expect static credentials to be passed in.

false

Boolean

camel.component.aws2-mq.use-profile-credentials-provider

Set whether the MQ client should expect to load credentials through a profile credentials provider.

false

Boolean