AWS Kinesis Firehose

Since Camel 3.2

Only producer is supported

The AWS2 Kinesis Firehose component supports sending messages to Amazon Kinesis Firehose service (Batch not supported).

Prerequisites

You must have a valid Amazon Web Services developer account, and be signed up to use Amazon Kinesis Firehose. More information are available at AWS Kinesis Firehose

The AWS2 Kinesis Firehose component is not supported in OSGI

URI Format

aws2-kinesis-firehose://delivery-stream-name[?options]

The stream needs to be created prior to it being used.
You can append query options to the URI in the following format, ?options=value&option2=value&…​

URI Options

Configuring Options

Camel components are configured on two separate levels:

  • component level

  • endpoint level

Configuring Component Options

The component level is the highest level which holds general and common configurations that are inherited by the endpoints. For example a component may have security settings, credentials for authentication, urls for network connection and so forth.

Some components only have a few options, and others may have many. Because components typically have pre configured defaults that are commonly used, then you may often only need to configure a few options on a component; or none at all.

Configuring components can be done with the Component DSL, in a configuration file (application.properties|yaml), or directly with Java code.

Configuring Endpoint Options

Where you find yourself configuring the most is on endpoints, as endpoints often have many options, which allows you to configure what you need the endpoint to do. The options are also categorized into whether the endpoint is used as consumer (from) or as a producer (to), or used for both.

Configuring endpoints is most often done directly in the endpoint URI as path and query parameters. You can also use the Endpoint DSL and DataFormat DSL as a type safe way of configuring endpoints and data formats in Java.

A good practice when configuring options is to use Property Placeholders, which allows to not hardcode urls, port numbers, sensitive information, and other settings. In other words placeholders allows to externalize the configuration from your code, and gives more flexibility and reuse.

The following two sections lists all the options, firstly for the component followed by the endpoint.

Component Options

The AWS Kinesis Firehose component supports 18 options, which are listed below.

Name Description Default Type

cborEnabled (common)

This option will set the CBOR_ENABLED property during the execution.

true

boolean

configuration (producer)

Component configuration.

KinesisFirehose2Configuration

overrideEndpoint (common)

Set the need for overidding the endpoint. This option needs to be used in combination with uriEndpointOverride option.

false

boolean

uriEndpointOverride (common)

Set the overriding uri endpoint. This option needs to be used in combination with overrideEndpoint option.

String

useDefaultCredentialsProvider (common)

Set whether the Kinesis Firehose client should expect to load credentials through a default credentials provider or to expect static credentials to be passed in.

false

boolean

lazyStartProducer (producer)

Whether the producer should be started lazy (on the first message). By starting lazy you can use this to allow CamelContext and routes to startup in situations where a producer may otherwise fail during starting and cause the route to fail being started. By deferring this startup to be lazy then the startup failure can be handled during routing messages via Camel’s routing error handlers. Beware that when the first message is processed then creating and starting the producer may take a little time and prolong the total processing time of the processing.

false

boolean

operation (producer)

The operation to do in case the user don’t want to send only a record.

Enum values:

  • sendBatchRecord

  • createDeliveryStream

  • deleteDeliveryStream

  • describeDeliveryStream

  • updateDestination

KinesisFirehose2Operations

region (producer)

The region in which Kinesis Firehose client needs to work. When using this parameter, the configuration will expect the lowercase name of the region (for example ap-east-1) You’ll need to use the name Region.EU_WEST_1.id().

String

amazonKinesisFirehoseClient (advanced)

Autowired Amazon Kinesis Firehose client to use for all requests for this endpoint.

FirehoseClient

autowiredEnabled (advanced)

Whether autowiring is enabled. This is used for automatic autowiring options (the option must be marked as autowired) by looking up in the registry to find if there is a single instance of matching type, which then gets configured on the component. This can be used for automatic configuring JDBC data sources, JMS connection factories, AWS Clients, etc.

true

boolean

proxyHost (proxy)

To define a proxy host when instantiating the Kinesis Firehose client.

String

proxyPort (proxy)

To define a proxy port when instantiating the Kinesis Firehose client.

Integer

proxyProtocol (proxy)

To define a proxy protocol when instantiating the Kinesis Firehose client.

Enum values:

  • HTTP

  • HTTPS

HTTPS

Protocol

accessKey (security)

Amazon AWS Access Key.

String

profileCredentialsName (security)

If using a profile credentials provider this parameter will set the profile name.

String

secretKey (security)

Amazon AWS Secret Key.

String

trustAllCertificates (security)

If we want to trust all certificates in case of overriding the endpoint.

false

boolean

useProfileCredentialsProvider (security)

Set whether the Kinesis Firehose client should expect to load credentials through a profile credentials provider.

false

boolean

Endpoint Options

The AWS Kinesis Firehose endpoint is configured using URI syntax:

aws2-kinesis-firehose:streamName

with the following path and query parameters:

Path Parameters (1 parameters)

Name Description Default Type

streamName (producer)

Required Name of the stream.

String

Query Parameters (16 parameters)

Name Description Default Type

cborEnabled (common)

This option will set the CBOR_ENABLED property during the execution.

true

boolean

overrideEndpoint (common)

Set the need for overidding the endpoint. This option needs to be used in combination with uriEndpointOverride option.

false

boolean

uriEndpointOverride (common)

Set the overriding uri endpoint. This option needs to be used in combination with overrideEndpoint option.

String

operation (producer)

The operation to do in case the user don’t want to send only a record.

Enum values:

  • sendBatchRecord

  • createDeliveryStream

  • deleteDeliveryStream

  • describeDeliveryStream

  • updateDestination

KinesisFirehose2Operations

region (producer)

The region in which Kinesis Firehose client needs to work. When using this parameter, the configuration will expect the lowercase name of the region (for example ap-east-1) You’ll need to use the name Region.EU_WEST_1.id().

String

useDefaultCredentialsProvider (common)

Set whether the Kinesis Firehose client should expect to load credentials through a default credentials provider or to expect static credentials to be passed in.

false

boolean

lazyStartProducer (producer (advanced))

Whether the producer should be started lazy (on the first message). By starting lazy you can use this to allow CamelContext and routes to startup in situations where a producer may otherwise fail during starting and cause the route to fail being started. By deferring this startup to be lazy then the startup failure can be handled during routing messages via Camel’s routing error handlers. Beware that when the first message is processed then creating and starting the producer may take a little time and prolong the total processing time of the processing.

false

boolean

amazonKinesisFirehoseClient (advanced)

Autowired Amazon Kinesis Firehose client to use for all requests for this endpoint.

FirehoseClient

proxyHost (proxy)

To define a proxy host when instantiating the Kinesis Firehose client.

String

proxyPort (proxy)

To define a proxy port when instantiating the Kinesis Firehose client.

Integer

proxyProtocol (proxy)

To define a proxy protocol when instantiating the Kinesis Firehose client.

Enum values:

  • HTTP

  • HTTPS

HTTPS

Protocol

accessKey (security)

Amazon AWS Access Key.

String

profileCredentialsName (security)

If using a profile credentials provider this parameter will set the profile name.

String

secretKey (security)

Amazon AWS Secret Key.

String

trustAllCertificates (security)

If we want to trust all certificates in case of overriding the endpoint.

false

boolean

useProfileCredentialsProvider (security)

Set whether the Kinesis Firehose client should expect to load credentials through a profile credentials provider.

false

boolean

Required Kinesis Firehose component options

You have to provide the FirehoseClient in the Registry with proxies and relevant credentials configured.

Usage

Static credentials, Default Credential Provider and Profile Credentials Provider

You have the possibility of avoiding the usage of explicit static credentials, by specifying the useDefaultCredentialsProvider option and set it to true.

The order of evaluation for Default Credentials Provider is the following:

  • Java system properties - aws.accessKeyId and aws.secretKey

  • Environment variables - AWS_ACCESS_KEY_ID and AWS_SECRET_ACCESS_KEY.

  • Web Identity Token from AWS STS.

  • The shared credentials and config files.

  • Amazon ECS container credentials - loaded from the Amazon ECS if the environment variable AWS_CONTAINER_CREDENTIALS_RELATIVE_URI is set.

  • Amazon EC2 Instance profile credentials.

You have also the possibility of using Profile Credentials Provider, by specifying the useProfileCredentialsProvider option to true and profileCredentialsName to the profile name.

Only one of static, default and profile credentials could be used at the same time.

For more information about this you can look at AWS credentials documentation

Message Headers

The AWS Kinesis Firehose component supports 3 message header(s), which is/are listed below:

Name Description Default Type

CamelAwsKinesisFirehoseRecordId (producer)

Constant: RECORD_ID

The record ID, as defined in http://docs.aws.amazon.com/firehose/latest/APIReference/API_PutRecord.html#API_PutRecord_ResponseSyntaxResponse Syntax.

String

CamelAwsKinesisFirehoseOperation (producer)

Constant: KINESIS_FIREHOSE_OPERATION

The operation we want to perform.

String

CamelAwsKinesisFirehoseDeliveryStreamName (producer)

Constant: KINESIS_FIREHOSE_STREAM_NAME

The name of the delivery stream.

String

Amazon Kinesis Firehose configuration

You then have to reference the FirehoseClient in the amazonKinesisFirehoseClient URI option.

from("aws2-kinesis-firehose://mykinesisdeliverystream?amazonKinesisFirehoseClient=#kinesisClient")
  .to("log:out?showAll=true");

Providing AWS Credentials

It is recommended that the credentials are obtained by using the DefaultAWSCredentialsProviderChain that is the default when creating a new ClientConfiguration instance, however, a different AWSCredentialsProvider can be specified when calling createClient(…​).

Kinesis Firehose Producer operations

Camel-AWS s3 component provides the following operation on the producer side:

  • SendBatchRecord

  • CreateDeliveryStream

  • DeleteDeliveryStream

  • DescribeDeliveryStream

  • UpdateDestination

Send Batch Records Example

You can send an iterable of Kinesis Record (as the following example shows) or you can send directly a PutRecordBatchRequest POJO instance in the body.

    @Test
    public void testFirehoseBatchRouting() throws Exception {
        Exchange exchange = template.send("direct:start", ExchangePattern.InOnly, new Processor() {
            public void process(Exchange exchange) throws Exception {
                List<Record> recs = new ArrayList<Record>();
                Record rec = Record.builder().data(SdkBytes.fromString("Test1", Charset.defaultCharset())).build();
                Record rec1 = Record.builder().data(SdkBytes.fromString("Test2", Charset.defaultCharset())).build();
                recs.add(rec);
                recs.add(rec1);
                exchange.getIn().setBody(recs);
            }
        });
        assertNotNull(exchange.getIn().getBody());
    }

from("direct:start").to("aws2-kinesis-firehose://cc?amazonKinesisFirehoseClient=#FirehoseClient&operation=sendBatchRecord");

In the deliveryStream you’ll find "Test1Test2".

Dependencies

Maven users will need to add the following dependency to their pom.xml.

pom.xml

<dependency>
    <groupId>org.apache.camel</groupId>
    <artifactId>camel-aws2-kinesis</artifactId>
    <version>${camel-version}</version>
</dependency>

where ${camel-version} must be replaced by the actual version of Camel.

Spring Boot Auto-Configuration

When using aws2-kinesis-firehose with Spring Boot make sure to use the following Maven dependency to have support for auto configuration:

<dependency>
  <groupId>org.apache.camel.springboot</groupId>
  <artifactId>camel-aws2-kinesis-starter</artifactId>
  <version>x.x.x</version>
  <!-- use the same version as your Camel core version -->
</dependency>

The component supports 46 options, which are listed below.

Name Description Default Type

camel.component.aws2-kinesis-firehose.access-key

Amazon AWS Access Key.

String

camel.component.aws2-kinesis-firehose.amazon-kinesis-firehose-client

Amazon Kinesis Firehose client to use for all requests for this endpoint. The option is a software.amazon.awssdk.services.firehose.FirehoseClient type.

FirehoseClient

camel.component.aws2-kinesis-firehose.autowired-enabled

Whether autowiring is enabled. This is used for automatic autowiring options (the option must be marked as autowired) by looking up in the registry to find if there is a single instance of matching type, which then gets configured on the component. This can be used for automatic configuring JDBC data sources, JMS connection factories, AWS Clients, etc.

true

Boolean

camel.component.aws2-kinesis-firehose.cbor-enabled

This option will set the CBOR_ENABLED property during the execution.

true

Boolean

camel.component.aws2-kinesis-firehose.configuration

Component configuration. The option is a org.apache.camel.component.aws2.firehose.KinesisFirehose2Configuration type.

KinesisFirehose2Configuration

camel.component.aws2-kinesis-firehose.enabled

Whether to enable auto configuration of the aws2-kinesis-firehose component. This is enabled by default.

Boolean

camel.component.aws2-kinesis-firehose.lazy-start-producer

Whether the producer should be started lazy (on the first message). By starting lazy you can use this to allow CamelContext and routes to startup in situations where a producer may otherwise fail during starting and cause the route to fail being started. By deferring this startup to be lazy then the startup failure can be handled during routing messages via Camel’s routing error handlers. Beware that when the first message is processed then creating and starting the producer may take a little time and prolong the total processing time of the processing.

false

Boolean

camel.component.aws2-kinesis-firehose.operation

The operation to do in case the user don’t want to send only a record.

KinesisFirehose2Operations

camel.component.aws2-kinesis-firehose.override-endpoint

Set the need for overidding the endpoint. This option needs to be used in combination with uriEndpointOverride option.

false

Boolean

camel.component.aws2-kinesis-firehose.profile-credentials-name

If using a profile credentials provider this parameter will set the profile name.

String

camel.component.aws2-kinesis-firehose.proxy-host

To define a proxy host when instantiating the Kinesis Firehose client.

String

camel.component.aws2-kinesis-firehose.proxy-port

To define a proxy port when instantiating the Kinesis Firehose client.

Integer

camel.component.aws2-kinesis-firehose.proxy-protocol

To define a proxy protocol when instantiating the Kinesis Firehose client.

Protocol

camel.component.aws2-kinesis-firehose.region

The region in which Kinesis Firehose client needs to work. When using this parameter, the configuration will expect the lowercase name of the region (for example ap-east-1) You’ll need to use the name Region.EU_WEST_1.id().

String

camel.component.aws2-kinesis-firehose.secret-key

Amazon AWS Secret Key.

String

camel.component.aws2-kinesis-firehose.trust-all-certificates

If we want to trust all certificates in case of overriding the endpoint.

false

Boolean

camel.component.aws2-kinesis-firehose.uri-endpoint-override

Set the overriding uri endpoint. This option needs to be used in combination with overrideEndpoint option.

String

camel.component.aws2-kinesis-firehose.use-default-credentials-provider

Set whether the Kinesis Firehose client should expect to load credentials through a default credentials provider or to expect static credentials to be passed in.

false

Boolean

camel.component.aws2-kinesis-firehose.use-profile-credentials-provider

Set whether the Kinesis Firehose client should expect to load credentials through a profile credentials provider.

false

Boolean

camel.component.aws2-kinesis.access-key

Amazon AWS Access Key.

String

camel.component.aws2-kinesis.amazon-kinesis-client

Amazon Kinesis client to use for all requests for this endpoint. The option is a software.amazon.awssdk.services.kinesis.KinesisClient type.

KinesisClient

camel.component.aws2-kinesis.async-client

If we want to a KinesisAsyncClient instance set it to true.

false

Boolean

camel.component.aws2-kinesis.autowired-enabled

Whether autowiring is enabled. This is used for automatic autowiring options (the option must be marked as autowired) by looking up in the registry to find if there is a single instance of matching type, which then gets configured on the component. This can be used for automatic configuring JDBC data sources, JMS connection factories, AWS Clients, etc.

true

Boolean

camel.component.aws2-kinesis.bridge-error-handler

Allows for bridging the consumer to the Camel routing Error Handler, which mean any exceptions occurred while the consumer is trying to pickup incoming messages, or the likes, will now be processed as a message and handled by the routing Error Handler. By default the consumer will use the org.apache.camel.spi.ExceptionHandler to deal with exceptions, that will be logged at WARN or ERROR level and ignored.

false

Boolean

camel.component.aws2-kinesis.cbor-enabled

This option will set the CBOR_ENABLED property during the execution.

true

Boolean

camel.component.aws2-kinesis.configuration

Component configuration. The option is a org.apache.camel.component.aws2.kinesis.Kinesis2Configuration type.

Kinesis2Configuration

camel.component.aws2-kinesis.enabled

Whether to enable auto configuration of the aws2-kinesis component. This is enabled by default.

Boolean

camel.component.aws2-kinesis.health-check-consumer-enabled

Used for enabling or disabling all consumer based health checks from this component.

true

Boolean

camel.component.aws2-kinesis.health-check-producer-enabled

Used for enabling or disabling all producer based health checks from this component. Notice: Camel has by default disabled all producer based health-checks. You can turn on producer checks globally by setting camel.health.producersEnabled=true.

true

Boolean

camel.component.aws2-kinesis.iterator-type

Defines where in the Kinesis stream to start getting records.

ShardIteratorType

camel.component.aws2-kinesis.lazy-start-producer

Whether the producer should be started lazy (on the first message). By starting lazy you can use this to allow CamelContext and routes to startup in situations where a producer may otherwise fail during starting and cause the route to fail being started. By deferring this startup to be lazy then the startup failure can be handled during routing messages via Camel’s routing error handlers. Beware that when the first message is processed then creating and starting the producer may take a little time and prolong the total processing time of the processing.

false

Boolean

camel.component.aws2-kinesis.max-results-per-request

Maximum number of records that will be fetched in each poll.

1

Integer

camel.component.aws2-kinesis.override-endpoint

Set the need for overidding the endpoint. This option needs to be used in combination with uriEndpointOverride option.

false

Boolean

camel.component.aws2-kinesis.profile-credentials-name

If using a profile credentials provider this parameter will set the profile name.

String

camel.component.aws2-kinesis.proxy-host

To define a proxy host when instantiating the Kinesis client.

String

camel.component.aws2-kinesis.proxy-port

To define a proxy port when instantiating the Kinesis client.

Integer

camel.component.aws2-kinesis.proxy-protocol

To define a proxy protocol when instantiating the Kinesis client.

Protocol

camel.component.aws2-kinesis.region

The region in which Kinesis Firehose client needs to work. When using this parameter, the configuration will expect the lowercase name of the region (for example ap-east-1) You’ll need to use the name Region.EU_WEST_1.id().

String

camel.component.aws2-kinesis.secret-key

Amazon AWS Secret Key.

String

camel.component.aws2-kinesis.sequence-number

The sequence number to start polling from. Required if iteratorType is set to AFTER_SEQUENCE_NUMBER or AT_SEQUENCE_NUMBER.

String

camel.component.aws2-kinesis.shard-closed

Define what will be the behavior in case of shard closed. Possible value are ignore, silent and fail. In case of ignore a message will be logged and the consumer will restart from the beginning,in case of silent there will be no logging and the consumer will start from the beginning,in case of fail a ReachedClosedStateException will be raised.

Kinesis2ShardClosedStrategyEnum

camel.component.aws2-kinesis.shard-id

Defines which shardId in the Kinesis stream to get records from.

String

camel.component.aws2-kinesis.trust-all-certificates

If we want to trust all certificates in case of overriding the endpoint.

false

Boolean

camel.component.aws2-kinesis.uri-endpoint-override

Set the overriding uri endpoint. This option needs to be used in combination with overrideEndpoint option.

String

camel.component.aws2-kinesis.use-default-credentials-provider

Set whether the Kinesis client should expect to load credentials through a default credentials provider or to expect static credentials to be passed in.

false

Boolean

camel.component.aws2-kinesis.use-profile-credentials-provider

Set whether the Kinesis client should expect to load credentials through a profile credentials provider.

false

Boolean
Back to top